Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BSS

Viewing 15 posts - 181 through 195 (of 253 total)
1 2 3 … 12 13 14 15 16 17
  • Author
    Posts
  • 12th April 2006 at 06:28 #35341
    Dipta
    Guest

    can any one tell me the full form of RBLT?

    regards,
    Dipta

    17th April 2006 at 10:56 #35342
    LJ
    Guest

    RBLT: RTS Abis-Interface Line Terminal, where RTS is RADIO TRANSMISSION AND TRANSPORT SUBSYSTEM

    19th April 2006 at 14:34 #35343
    Souleymane
    Guest

    Hi all
    I will like to know if there is no problem for BTSs located in the same LAC to be on didderent BSC

    24th April 2006 at 13:19 #35344
    Debasish Deb
    Guest

    Hi All,

    Can anyone plz tell me regarding MAIO? Eg. What is MAIO and its usefullness in GSM environment?

    Thanx & regards,

    Debasish.

    25th April 2006 at 08:25 #35345
    pix
    Guest

    >> Debasish Deb > Souleymane

    25th April 2006 at 12:36 #35346
    prianshu sen
    Guest

    i m an GSM engineer and i want to know about the whole function of cdu, tru, dxu-21 and also the block diagram of ericsson bts rbs 2206.
    i want to know abt the internal block diagram of the same rbs, and how its work. please tell me abt these, for this i am facing lots of problems.
    i have very less experience in the bts and i have interest in this.

    thanks
    prianshu

    25th April 2006 at 14:07 #35347
    alinour
    Guest

    1- How many frequencies BTS can support in each sector (3 sectors)
    2- where can we define the ID of the BTS

    25th April 2006 at 18:20 #35348
    khadija
    Guest

    Hi all,

    Im OMC technician but i have small experience regarding BSC .
    What i need is to know the hardware parts of the BSC.

    I need your help please.

    25th April 2006 at 21:31 #35349
    pix
    Guest

    Debasish Deb

    MAIO is a parameter only used for frequency hopping. It allows synchronized cells (usually cells within same BTS) to avoid using co-channel or adjacent-channel frequencies on the same timeslot.

    25th April 2006 at 21:34 #35350
    Pix
    Guest

    Souleymane

    Absolutely no problem about using cells from different BSC within the same Location Area.

    Negative points : It slows down the handovers a bit and prevent from using specific traffic-related handovers though, but it is not critical.

    Positive points : in case a BSC crashes, it doesn’t impact the full area.

    1st May 2006 at 09:17 #35351
    prianshu
    Guest

    i want a block diagram of ericsson bts and how its work.

    4th May 2006 at 06:50 #35352
    Yasir
    Guest

    I want to know that what is difference between Classic and hybrid microwave links? If anyone can give me definition of RBLT?

    Thanx for ur coorperation on advance.

    4th May 2006 at 15:43 #35353
    SACHINSHARMA
    Guest

    HI ALL FIRST OF ALL I THANX ALL OF U FOR UR WILLINGNESS TOWARDS INFORMATION SHARING THIS IS THE ONLY WAY TO MULTIPLY OUR SKILLS
    I WANT TO KNOW IN DETAILS N IN DEPTH ABOUT ERICSSON RBS2202,2206

    PLZ HELP

    6th May 2006 at 17:45 #35354
    joseph
    Guest

    i want general information and operation of bss, cell planner

    9th May 2006 at 13:37 #35355
    Souleymane
    Guest

    Hi all
    please i will like to have some explanaition on Away link transmission

  • Author
    Posts
Viewing 15 posts - 181 through 195 (of 253 total)
1 2 3 … 12 13 14 15 16 17
  • The forum ‘Telecom Design’ is closed to new topics and replies.