Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DX200 Messages

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 21st January 2010 at 09:58 #60824
    Zbigniew
    Guest

    Hi all,

    what is meaning of the DX200 message number (here: 9389) and the message data (starting with 0C) in Service Terminal (ZDDS) ? Here is an example output:

    MONITORING TIME: 2010-01-20 10:57:44.27
    RECEIVED BY: 01B4 0000 00
    MONITORED MESSAGE: 001F 4D5C 01BF 3BDB 00 19 0000 9389 0031

    0C 7D 01 04 0D 0A 2A 00 01 22 00 00 21 00 00

    I could not find any hints in NED on this topic. Is there any SW to transform this in text format ?

    Kind Regards

    Zbigniew

    21st January 2010 at 12:57 #60825
    kamal
    Guest

    in which unit & using what extension u r getting this output?

    21st January 2010 at 13:06 #60826
    Zbigniew
    Guest

    Hi Kamal,

    the service terminal was started on the active MCMU of a BSC with MML command ZDDS:MCMU,0.

    In the service terminal I used the commands

    ZOEBF clear the monitoring buffer
    ZOEQ destroy the monitoring buffer
    ZOEBR::3FFFFF,0 set buffer size
    ZOEC::SR:(NUM=9389) monitor message 9389
    ZOEM start monitoring
    ZOES stop monitoring after 10 min
    ZOEG generate the output

    Kind Regards

    Zbigniew

    23rd January 2010 at 11:25 #60827
    kamal
    Guest

    Hi,check in our sharenet-IMS forum..I have posted doc about the service terminal extensions..
    Regards,
    Kamal kotecha

    11th June 2010 at 05:52 #60828
    jack
    Guest

    hi kamal.
    i can not find your sharenet-IMS forum.
    please send me the URL.
    jack_erlang@hotmail.com

    11th June 2010 at 06:19 #60829
    jack
    Guest

    hi Zbigniew.
    i want to know the purpose of this commands?
    and what is the description of message number 9389?
    and also in NOKIA BSC 3i we have an extension of service terminal named:RCBUGG

    with this extension we can replace the MML commands in the US command group (Working State
    and Restart Handling) in situations in which the OMU is not in use and the
    MML commands cannot be executed.
    i want to know step to step which commands should apply for this ???

    19th June 2017 at 18:30 #60830
    steve
    Guest

    DX 200 GW212 2017-06-09 14:12:05
    ALARMS CURRENTLY ON
    GW212 CHU-0 SWITCH 2016-12-05 11:21:56.69
    *** ALARM VDS-0 VIDAST
    (0001) 2650 STORING OF THE DATA FAILED ON ONE DISK
    WDU 01 11615d

    26th June 2018 at 17:55 #60831
    JUAN
    Guest

    001F 4D5C 01BF 3BDB 00 19 0000

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.