- This topic has 38 replies, 1 voice, and was last updated 8 years, 10 months ago by
Bhaw Nath.
-
AuthorPosts
-
Pix
Guestincrease capacity at network level.
Austin
GuestHi Everyone, has anyone treated this alarms for Nokia equipment..? “working SDCCH channel below threshold” please kindly tell how. Thanks
Mak
GuestFor The SD Drop Reasons in Nokia system you can check Report No 166 and 204. You will find out the sd drop reasons.
Mak
Guest“working SDCCH channel below threshold”.
What I think your cell is required more SDs.
Could you tell me your sd configuration against Cell Trx Configuration.
kurbeh
GuestMy SDCCH Configuration is one SDCCH block per TRX, still having high SDC drop!!!
pavit kapoor
GuestYou can change RET n SLO for SD drop to Solve
Swadhin
GuestOne of my BSC having SD Drop more than 2Month…..
There is no such type of crical alarm.
& also I have checked all Freq, bsic,maio,hsn..ets..No outage in BSC.No Ater prob..
No such type of hard ware issues..Can any one Suggest me How I can improve in bsc..
I am working in Nokia System
arun
Guesthow to reduce the sd drop an we have more sd allocate after that i face problem
Iqbal Ahmed
GuestDear Swadhin ,
1.you need to check the 236 report for Overshooting.
2.need to check the timer for sdcch. if its less increase it.
3.with 196 report check the quality of the particular trx on which sdcch is present .if quality seems to be bad then change the sdcch to another trx.
Ahmad
GuestDear
You can change T200S timer to decrease SDCCH Drop.KARTHICK.R
GuestHI ALL,
I’m new to Telecom field.
I want to know the differance between SD block & TCH Block and how to reduce it…
my mail id:- engineerkarthick@yahoo.com
Swadhin
GuestDear Iqbal Ahmed,
There is no such type of Overshooting Issues.
Sd Drop has been degraded not cosistently..
Is there any BSC Parameter need to change..
already changed RXTA, ITCF etc…
Every alteranate 5 days it has been occurred….
Supposed 5 days it is going to smooth & after it has been degraded very badly…
Pls suggest me if any BSC level parameter change or BTS level para need to change..
BTS .. AHOP,SENA, RXDIV..all the para has been changed…Timer also changed..T200, T3101
OPls suggest me the timer regarding SD drop
Swadhin
GuestThere is no such type of DAC issues..also
bjushka
GuestHi Swadhin,
What is the value of the parameter rx level access that you have in your network?
BR
bjushka
tauseef
Guestcheck traffic and utilisation of the particular bsc..
-
AuthorPosts