- This topic has 156 replies, 1 voice, and was last updated 10 years, 10 months ago by Gurjinder.
3rd June 2004 at 10:47 #34445ZoneGuest
Waleed, is there a some chance that you can pass some papers to me for bts components?4th June 2004 at 12:58 #34446ZoneGuest
what about HW components of BSC, BTS..COBA, COSA, DUAMCO, CU….?4th June 2004 at 16:54 #34447RajGuest
Can some one tell me what are the building blocks i.e hw and sw of a typical GSM BTS and where to get the detail information.4th June 2004 at 16:54 #34448RajGuest
Can some one tell me what are the building blocks i.e hw and sw of a typical GSM BTS and where to get the detail information.4th June 2004 at 16:56 #34449rajGuest
What is the best side to understand the GSm traffic planning , What is the Eralg undersatnding4th June 2004 at 17:43 #34450rajGuest
What is the best site or some one can send me the deatils nfo on traffic planning on inbuilding GSm solutions, or general erlang planning of GSM network10th June 2004 at 20:18 #34451AhmerGuest
Well I am quite new here, just came across this place by chance…
would really appreciate if someone could guide me to appropriate material for traffic dimensioning in gsm network16th June 2004 at 12:46 #34452Mohammed NayeemuddinGuest
can you eplain me in brief, how to design the TCH.1st July 2004 at 14:18 #34453BensonGuest
Dear Vijay Sharma,
Pliz help me to undersatnd what a 8,4,4 BTS configuration means. May you please send me some information on BSS commissioning procedures. My e-mail is email@example.com. Thanking you in advance.
Benson3rd July 2004 at 13:13 #34454Dinesh PatilGuest
I Am Telecomm Engg,I want to improve my knowledge of telecomm technology for that i need a mannual.7th July 2004 at 10:55 #34455Mohammed NayeemuddinGuest
pls can u tell me how many voice calls can be made in one traffic channel7th July 2004 at 11:12 #34456elfabGuest
hello everu body
I ‘m new in this forum…there si any body who works with the ellipse planning microwave,
I wana docs about cell and FH planning using this tool
have nice day & thank u15th July 2004 at 13:39 #34457KarthikGuest
A big doubt. Can anyone clarify??
We say that each Frequency Channel is separated by 200KHz. So this is the effective Bandwidth.This channel is divided into 8 Timeslots.
So 1/200KHz = 5 Microsec.
But if you see that 8 Timeslots constitutes one Frequency Channel, then as far as calculations show:
1 Timeslot = 0.577ms.
Which means 8 Timeslots = 4.16ms.
Can you justify how 5 Microsec can be divided so that we get 4.16ms.
I give up, how come 5 Microsec = 4.16ms ??????????????18th July 2004 at 06:58 #34458Mohammed NayeemuddinGuest
Assalam ali kum
can u pls explain me, how many voice call can be handled by one traffic channel at a time22nd July 2004 at 13:51 #34459PramodGuest
To Kartik ,
Buddy the other time left is the burst wherin we call it the Guard period in the burst (Dummy Burst- No data)