- This topic has 74 replies, 1 voice, and was last updated 3 years, 5 months ago by
Suman.
-
AuthorPosts
-
Ghamiz
GuestPlease, if anyone can explain what action should be taken on “BCCH Missing” alarm 7706? What causes may generate it?
Will be really grateful!
ranjeet
Guestmans fall
afzal imam
Guestplz list out the internal & external alarm geneated by nokia flexiBTS
Pramod Kumar Singh
GuestI want information about all alarm genrated by nokia bts (both external & internal)
Ravi
GuestHow many types of Alarams in Telecom Shelter
KJB
GuestHi Ghamiz.
7706 is due to O&M link down of BTS.Kindly check Site may be down,or LAPD for OM signalling may be OFF.BCCH missing 7767 apears when BCCH TRX is down dou to any reason.
Thx
KjbVincent
GuestGood day Sirs, how to resolve this problem? On site there’s no active alarm but on NOC there’s a Recovery Action Failure, and sometimes HSDPA failure indicating cell A, yet we’ve already replaced the FRGC module where cell A is located.
Please help me with this. Tnx
Vincent
GuestSir Geoff about this sleeping cell issue, does 3G/HSDPA had this also? Thank you..
>>>>>>
Nokia have a sleeping cell issue in S11.5, which is fixed in CD 4 I think (we are now on CD10) Many BTS’s report 7738 alarm (first supp info field will tell you if this is as SD/TCH/GPRS issue or combination of the 3) This issue is resolved by swapover of BCSU. Currently we have see an issue with 7738 alarms (again related to BCSU) following automatic recovery action of a bcsu, in this case all effected BTS’s require reset to resolve. Also it could be that your BTS is supervised 24 hrs a day (ZEEO:SUP;) and you genuinely have no traffic. In this case your supervision parameters need adjustment.Ghamiz
GuestThanks KJB for the reply. Kindly tell what steps can be taken remotely remedy?
jack
Guesthi Vincent.
it seems that you are expert in NOKIA BSC 3i.
i have one important question.1.in NOKIA BSC 3i we have an extension of service terminal named:RCBUGG
with this extension we can replace the MML commands in the US command group (Working State
and Restart Handling) in situations in which the OMU is not in use and the
MML commands cannot be executed.
i want to know step to step which commands should apply for this ???2-can we measure VSWR without the help of site master/spectrum analyzar??
please some on expert in NOKIA BSC3i explain it for me step to step.thank u
prit
Guesthi,what is full ,half,dual rate call in gsm.pls explain in brief ….
Ish
GuestReasons for High TCH drop, though the DCR is low, no alarms. can any1 suggest me which parameter to look into n do optimization accordingly.
sanchit jain
Guestcan anyone tell me how many types of alarms are there in gsm site???
please list out all the internal and signalling or any other alarms???Rajratna
GuestDo we get any alarm when BCCH TRX comes up after claring BCCH Missing alarm?
mansisharma905@gmail.com
Guesthello,
if anyone can solve my problem i have to prepare a project inbts alarm monitoring &ihave no clue ,no idea can anyone send mea sample project sothat ican find iteasy to make currently i have just passed B.TECH 3RD YEAR
ITS QUITE URGENT -
AuthorPosts