Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

High HO Failure.

  • This topic has 1 reply, 1 voice, and was last updated 17 years ago by Nitin.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #47813
    Purusharth Verma
    Guest

    We have checked all possible causes like hardware problems, neighbour lists, HO taking place but have found no clue why the HO fail in one site is crossing over 20%. The site is single carrier as are the surrounding sites so interfrequency HO is not required here. Request on inputs…..

    #47814
    Nitin
    Guest

    Hi Purusharth Verma,
    Please check:
    1.if their is any external interference.
    2.Distance from source to target cell. Might be some times saples are taken from too far distance by which a mobile can try to H.O & it causes H.O
    3.Check Link balance reports, might be imbalancing.
    4.Finaly you can do one thing, just delete the neighbour & recreate them with fress parameters. It will works many times.

    Regards,
    Nitin

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.