- This topic has 133 replies, 1 voice, and was last updated 8 years, 5 months ago by
Dan.
-
AuthorPosts
-
20th October 2007 at 13:59 #47603
Khalil Najmi
GuestDear all
We are involved in site acquisition business in Karachi, Pakistan. We are working closely with local administrative authorities and have received permission to setup street level micro sites on walkways. WiFi and WiMax is the new wave in Pakistan. I would appriciate if anyone can provide me pics, pic leads for Street Level Micro BTS, and Street Level WiFi base stations their specs, cabinet specs and how its is done. I would also be interested if any organization is interested in working with us in this part of the world. Best Regards to all24th October 2007 at 02:15 #47604Mucky
GuestDear Goni,if you change and replace the parts of RBS such as PSU,CDU or TRU it should be to recreate IDB and reset the DXU. This help the DXU to check new equipment installed there. If nothing still happen,please check the E1(some often there is problem with crossconnect E1 to RBS).
25th October 2007 at 12:40 #47605finn
Guestif you change any PSU, CDU or TRU, you dont have to recreate IDB.. it’s defined already.. if you are going to do add or remove PSU or TRU (not CDU – TRU or dTRU dependent), then you have to modify the IDB.. not create.. dont do much reset, BSC guys will get angry.. E1 doesn’t have to do anything with the hardware database.
26th October 2007 at 17:39 #47606RITZY
Guestericsson n huawei bss product difference? i think currently both ericsson and huawei doing well all over the world. so i strongly believe that we gonna be benefited for own career. both companies doing very depth R&D for thier gsm products. so please share your own experience.
20th December 2007 at 21:36 #47607fung
GuestRBS2216 is part of so called Flamingo, while whole Flamingo scope contains RBS2216, RBS2116 and BBS2216/2116.
RBS2216 can support more than 200 SCC, and only half size of the existing RBS2206.
DXU-31 and DRU are the main units. The main change actually is that RBS2216 does not have any backplane, so all cabling are in the front.
T-mobil was the FOA customer, which means TMO are using a lot of 2216 in field, while Turkeycell also have alot.
26th January 2008 at 14:47 #47608zainul
GuestDear Sir,
Im doing swapping mircocell from RBS2302 to RBS2308, the problem is,
went a loading data from BSC my operational and Local remote LED being off.
Then Loading failure at release CF. It is because a Flash Card or any other solution?15th February 2008 at 04:08 #47609Flemingo Power consumption
GuestHi,
Anyone knows comparision of Power consumption for RBS 2216 to 2206 in following conditions
Load on all TRX in Idle
Load on BCCH Only
Typical BTS load
“Peak load on all TS busy
(All 90 TS busy for a 4/4/4)”2nd March 2008 at 20:16 #47610akindele rafiu
Guesthow can i easily interpret RBS configuratio eg 2;2;2, 4;4;4 or 6;4;0 the rbs could be 2202 or 2216
what diff is between rbs 900Mhz
and 1800MHZthanks
16th March 2008 at 18:45 #47611zoy
GuestHi all,
Could anyone send to me the “format of creating IDB”, I mean how to creat IDB and one complete BSC Database.
I am waiting of ur cooperation.
Thanks
My e-mail: zoy_nur@yahoo.com17th March 2008 at 05:45 #47612Mucky
GuestTo know about the configuration exactly,you have to know about the TRX configuration which command RXMOP:MO=RXOTRX-{TGnumber}-{TRXnumber}.
you can count the TRX related to the cell depend on,so the config itself can be defined.21st March 2008 at 15:00 #47613andreas
GuestEhhh i need your help
can you help me how to do 3.3.3 configuration with RBS 2116
27th March 2008 at 13:48 #47614Kuuku2
GuestHas anybody had specific problems with 2216 RBS.
22nd April 2008 at 02:36 #47615Mucky
GuestHi Andreas,
To make configuration 3/3/3 on RBS2116 is using parameter Hybrid Combiner with configuration 3 x 4 and all is done same as when we will config 4/4/4 but on the BSC parameter set only 3 TRX active for each cell 0,1,2…4,5,6…8,9,10 (standard sequence).
29th April 2008 at 03:51 #47616Md.Mafiul Islam
GuestDear All,
Can any body provide me the power consumption details about the RBS 2206, 2206i
BR
Mafi13th May 2008 at 17:03 #47617Slawomir
GuestHow much power get from RBS 2206 ?
it 6 * 35 W for 900 Mhz
it 6 * 28 W for 1800 Mhz ??? -
AuthorPosts
- The forum ‘Telecom Design’ is closed to new topics and replies.