Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DRT

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #47312
    un7fda
    Guest

    Hello,Dear Colleagues !

    What Direct Retry Threshold value (DRT) would you recommend for adjacency definitions in co-site and different sites’ sectors.

    #47313
    Pix
    Guest

    try -85dBm.

    Though, I prefer -80dBm when you have enough overlap (in the urban areas for instance).

    #47314
    un7fda
    Guest

    Many thanks!
    And so it is possible: inside BCF:-80, and for others cell by default-100?
    (a city mode)

    #47315
    pix
    Guest

    default at -100 might lead too numerous call drops. You should stay below -90dBm (that’s quite an aggressive choice alreay).

    don’t forget that’s this threshold should be higher thn the threshold for emergency handover (low DL rxlev), otherwise it will lead to a ping pong situation.

    #47316
    un7fda
    Guest

    Hello, Pix.
    Forgive, we about one parameter speak?
    DRT (Direct Retry Threshold), for neighbours.
    Interestingly.

    #47317
    pix
    Guest

    un7fda,

    sorry, i don’t understand your question…

    #47318
    un7fda
    Guest

    Ok! Thanks, Pix!

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.