This is a straight serial cable, having DB-9(M) at one end and DB-9(F) at the other. The pin configuration is very simle. Pin 1 of DB-9(M) is connected to pin 1 of DB-9(F). 2 with 2 and so on.
Hello Guys,
Kindly help me about how to connect my PC to OMT, cause am trying to login but not successful.. do you guys think that I need a S/W driver for serial to ethernet cable??
and where I could find it??
Dear jihed
A lot of usb to serial 232 work with window 7 but when u are using it omt will not work or you must change the window to winxp or you must search for one usb name best
i am using one it work will all windows tube name best
regard
jamil
use your multi metre, place a cut wire on the serial cable port and check inside to see the numbers (i.e 5,4,3,2,1 etc) try to fit the tested wire on each pin slot and read it with the corresponding colours from the other end of the open cable. monitor the cable while reading it and this will allow you to identify the colour code… the colour code numbers needed are (5,3,2). If you are able to get the respective colour code numbers, you can no use your rj45 connector and fix it in the first 1,2,3 section of the connector… this should do..
So in simple language.. 5 3 2 (serial pin slot) to 1 2 3 (rj45 connector).. If you get it let me know.. knowledge is free