Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

CDMA2000 1x KPI

Viewing 15 posts - 1 through 15 (of 16 total)
  • Author
    Posts
  • #45379
    sarah
    Guest

    I’m CDMA2000 1x planning & opt engineer.I’m new in this field,So I need your help to determine the kpi which can help me to handle the radio network performance & utilization.

    thanks.

    #45380
    Mandar
    Guest

    Hi Sarah u r working for which firm

    #45381
    sarah
    Guest

    Hi Mandar

    thanks for your reply

    I work on ZTE & Huawei equipment.

    #45382
    mandar
    Guest

    Hi sarah can i hav ur ID so dat i can ask u some of the queries, i work on motorola system

    #45383
    Farooq
    Guest

    Hi Sarah where are you, i work o ZTE equipment, and i need some help. what is KPI and how do you find this.

    #45384
    RF
    Guest

    hi
    wich BTS you are used as ZTE equipment( ZXC10) and which BTS you re used as huawei equipment ( 3606,3612)????
    and what you re using as system ( softswitch and NGN) or BSC and MSC

    #45385
    sarah
    Guest

    Dear Farooq

    KPI is ,key performance indicators,these KPI use as bench marks to measure the netowrk preformance.

    Best wishes

    #45386
    mandar
    Guest

    hi sarah

    u work in which country

    #45387
    fadil
    Guest

    I think the KPI not related to specific venor it is general concept to measure network performance like ASR,NER ,ABR,Gos..etc.

    #45388
    manoj
    Guest

    Sarah,I think your are getting more questions than answer

    Main KPIs
    i)Call setup Success rate
    ii)Call block Rate
    iii)Drop Call rate
    iv)SDCCH loss factor
    v)Handover success rate

    The top 4 are required to manage the Radio Utilization

    #45389
    Pix
    Guest

    Manoj, aren’t those GSM KPI ? I guess in CDMA the names are different but their overall meanings are identical.

    Sarah, i will try to check it out tomorrow… (and i’m not asking you in which country you’re working in ! 😀 )

    #45390
    Pix
    Guest
    #45391
    Sarah
    Guest

    Dear Manoj

    Thank you for your useful participation .I appreciated this.

    Regards

    #45392
    Sarah
    Guest

    Dear Manoj

    could u please explain (SDCCH loss factor),how is it mean and how calculate it.

    Best wishes

    #45393
    ayat
    Guest

    hello ,allllllllll
    Some vendors do not consider handover success ratio as a main KPI,
    which way is right,
    I monitor Handover success ratio per cell, BSC, or Both
    Is there certain value for this /KPI in Busy hour (> 98% is good per cell, BSC) or there are other consideration.
    Thanks
    I am wating for your reply

Viewing 15 posts - 1 through 15 (of 16 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.