- This topic has 15 replies, 1 voice, and was last updated 13 years ago by Arvin.
12th July 2006 at 13:45 #45379sarahGuest
I’m CDMA2000 1x planning & opt engineer.I’m new in this field,So I need your help to determine the kpi which can help me to handle the radio network performance & utilization.
thanks.13th July 2006 at 09:08 #45380MandarGuest
Hi Sarah u r working for which firm15th July 2006 at 06:48 #45381sarahGuest
thanks for your reply
I work on ZTE & Huawei equipment.28th July 2006 at 09:56 #45382mandarGuest
Hi sarah can i hav ur ID so dat i can ask u some of the queries, i work on motorola system28th July 2006 at 12:37 #45383FarooqGuest
Hi Sarah where are you, i work o ZTE equipment, and i need some help. what is KPI and how do you find this.29th July 2006 at 09:00 #45384RFGuest
wich BTS you are used as ZTE equipment( ZXC10) and which BTS you re used as huawei equipment ( 3606,3612)????
and what you re using as system ( softswitch and NGN) or BSC and MSC29th July 2006 at 10:08 #45385sarahGuest
KPI is ,key performance indicators,these KPI use as bench marks to measure the netowrk preformance.
Best wishes29th July 2006 at 14:50 #45386mandarGuest
u work in which country3rd August 2006 at 07:50 #45387fadilGuest
I think the KPI not related to specific venor it is general concept to measure network performance like ASR,NER ,ABR,Gos..etc.3rd August 2006 at 08:34 #45388manojGuest
Sarah,I think your are getting more questions than answer
i)Call setup Success rate
ii)Call block Rate
iii)Drop Call rate
iv)SDCCH loss factor
v)Handover success rate
The top 4 are required to manage the Radio Utilization3rd August 2006 at 08:44 #45389PixGuest
Manoj, aren’t those GSM KPI ? I guess in CDMA the names are different but their overall meanings are identical.
Sarah, i will try to check it out tomorrow… (and i’m not asking you in which country you’re working in ! 😀 )3rd August 2006 at 08:48 #45390PixGuest
check out this place :
http://www.zrt.pwr.wroc.pl/umts-optimisation/forum/9th August 2006 at 05:37 #45391SarahGuest
Thank you for your useful participation .I appreciated this.
Regards9th August 2006 at 05:50 #45392SarahGuest
could u please explain (SDCCH loss factor),how is it mean and how calculate it.
Best wishes8th August 2007 at 12:56 #45393ayatGuest
Some vendors do not consider handover success ratio as a main KPI,
which way is right,
I monitor Handover success ratio per cell, BSC, or Both
Is there certain value for this /KPI in Busy hour (> 98% is good per cell, BSC) or there are other consideration.
I am wating for your reply