Generic selectors
Exact matches only
Search in title
Search in content

Ericsson BSC Parameters

  • This topic is empty.
Viewing 15 posts - 1 through 15 (of 21 total)
  • Author
    Posts
  • #45005 Reply
    Tufail
    Guest

    Hi Guys

    if any body among u can provide me some parameters related to Eric BSC.

    Thanx in advance

    Tufail

    #45006 Reply
    Wireless Guy
    Guest

    You need to be specific:

    Power consumption?
    SAE sizing?
    Floor loading?

    #45007 Reply
    Tufail
    Guest

    HI

    Thanx for ur reply

    actually i need to know parameters abt cell, Nbr Cell, Handover, power control

    I am an RF Engineer, i have worked on Nokia but now i am working for Ericsson and i dont recognised ther paramter, since the paramter work similarly, thus i need a guide for BSS ericsson parameter.

    thankful for ur helping nature.

    if u want to email me my Email ID is Tufial@gmail.com

    thanx in advance
    Tufail

    #45008 Reply
    tufail
    Guest

    hello

    is here no a single person h can provide me some parameter related to Eric BSC

    #45009 Reply
    waleed1111
    Guest

    all BSC parameters of ERICSSON BSC can be found in Alex library

    #45010 Reply
    jhonclaire
    Guest

    hi, can anybody help me about handover parameter adjustment in ericsson. indoor cell can’t handover to outdoor cell, bcoz outdoor are too weak to trigger handover. i’ve already reduce the output power of the BTS. what parameters do i need to adjust to initiate handover?

    thank in advance for the help…

    GodBless,
    jhonclaire

    #45011 Reply
    Jeff
    Guest

    To trigger Ho to a weak cell,you can decrease the lRxLevDLH(Cell parameter) of the indoor and also decrease the HoMarginRxLev from the indoor to the oudoor cell you want to reach;that will make easier Ho to the outdoor.

    #45012 Reply
    jhonclaire
    Guest

    hi jeff,

    thankx for the reply, the equipment is Ericsson, HoMarginRxlev is for Nokia, am i right? what is its equivalent parameters in ericsson?

    thnx again in advance.

    jhonclaire

    #45013 Reply
    tufail
    Guest

    thanx WALEED.

    i dnt hav alex… if there is any doc abt da parameters n if u have it… plz, i need tht.

    thanx
    tufail
    Tufial@gmail.com

    #45014 Reply
    Boutouta
    Guest

    dear all i have lots of data about ericsson rbs ééà- but i need to exchange it with nokia wcdma bts
    e mail: m.boutouta@yahoo.fr

    zbest luck for all

    #45015 Reply
    @ziz
    Guest

    hi tufail please can i know why did u left nokia????

    #45016 Reply
    Tufail
    Guest

    Hello Aziz

    I left tht becoz i was outsourced.

    tufail

    #45017 Reply
    Roy
    Guest

    Hi Guys I’m BSS engineer from Indonesia I’m having a problem with indoor instalation using RBS2206 with 6/0/0 indoor configuration using a combiner that combines 3 RXD with 2 Output to antennas,I’m being confused with the RXD parameter at BSC that always gives RX DIVERSITY LOST since I give the RX parameter to RXD=AB, is there any idea of this, did I set wrong for this configuration, thanks in advance

    #45018 Reply
    moradinejad
    Guest

    please send me Ericsson BSS parameters in GSM mobile communication.

    #45019 Reply
    mamine
    Guest

    you have to do a training about your request before accepting that job!!!!!!!

Viewing 15 posts - 1 through 15 (of 21 total)
Reply To: Reply #45015 in Ericsson BSC Parameters
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">