- This topic has 20 replies, 1 voice, and was last updated 10 years, 3 months ago by
.
-
Posts
-
Hi Guys
if any body among u can provide me some parameters related to Eric BSC.
Thanx in advance
Tufail
You need to be specific:
Power consumption?
SAE sizing?
Floor loading?HI
Thanx for ur reply
actually i need to know parameters abt cell, Nbr Cell, Handover, power control
I am an RF Engineer, i have worked on Nokia but now i am working for Ericsson and i dont recognised ther paramter, since the paramter work similarly, thus i need a guide for BSS ericsson parameter.
thankful for ur helping nature.
if u want to email me my Email ID is Tufial@gmail.com
thanx in advance
Tufailhello
is here no a single person h can provide me some parameter related to Eric BSC
all BSC parameters of ERICSSON BSC can be found in Alex library
hi, can anybody help me about handover parameter adjustment in ericsson. indoor cell can’t handover to outdoor cell, bcoz outdoor are too weak to trigger handover. i’ve already reduce the output power of the BTS. what parameters do i need to adjust to initiate handover?
thank in advance for the help…
GodBless,
jhonclaireTo trigger Ho to a weak cell,you can decrease the lRxLevDLH(Cell parameter) of the indoor and also decrease the HoMarginRxLev from the indoor to the oudoor cell you want to reach;that will make easier Ho to the outdoor.
hi jeff,
thankx for the reply, the equipment is Ericsson, HoMarginRxlev is for Nokia, am i right? what is its equivalent parameters in ericsson?
thnx again in advance.
jhonclaire
thanx WALEED.
i dnt hav alex… if there is any doc abt da parameters n if u have it… plz, i need tht.
thanx
tufail
Tufial@gmail.comdear all i have lots of data about ericsson rbs ééà- but i need to exchange it with nokia wcdma bts
e mail: m.boutouta@yahoo.frzbest luck for all
hi tufail please can i know why did u left nokia????
Hello Aziz
I left tht becoz i was outsourced.
tufail
Hi Guys I’m BSS engineer from Indonesia I’m having a problem with indoor instalation using RBS2206 with 6/0/0 indoor configuration using a combiner that combines 3 RXD with 2 Output to antennas,I’m being confused with the RXD parameter at BSC that always gives RX DIVERSITY LOST since I give the RX parameter to RXD=AB, is there any idea of this, did I set wrong for this configuration, thanks in advance
please send me Ericsson BSS parameters in GSM mobile communication.
you have to do a training about your request before accepting that job!!!!!!!
