- This topic has 19 replies, 1 voice, and was last updated 3 years, 8 months ago by hungryforknowledge247.
3rd May 2006 at 03:43 #44954RahulGuest
the alarm “trx is stuck in waiting for system information” keeps on repeating , after giving restart to the trx it cancels but comes again in the same bcf trx. can any body suggest a permanent solution?3rd May 2006 at 08:51 #44955patrickGuest
change your TRX, it is out of order.
Normally it must be in BL-RSL or BL-TRX.
You can make lock/unlocked BCF (ZEFS)
If alarm is always here, change it.5th May 2006 at 02:30 #44956RahulGuest
thanx i suppose thats the last thing we can do. i just wanted to know the reason for this alarm.
i would also like to discuss one more thing.
in my network the ultrasite (indoor nad outdoor sites ) get hang ie the pcm is ok omu and all trx go in BL-RSL . after giving a hard reset(switching off and on of the PCU) to the site it comes up. there is no errror in the PCM (ZYMO).
Kindly suggest a reason and a solution.5th May 2006 at 08:28 #44957GSMGuest
May i know on wich project u r working…
Are you Upadhyay ???10th May 2006 at 14:58 #44958patrickGuest
Rahul – 5 May 2006
when you have a TRX-RSL, check LAPD
if you have LAPD D in UAD-RNrecove, you must do lock/unlocked:
We have the same problem, i think it is a bug of NOKIA system.
When you lost your link, a long time or a little time, after BCF become WO and TRX BL-RSL.26th May 2006 at 03:40 #44959RahulGuest
i have observed that this alarm trx is stuck in …
comes when there is a switch over in BCSU. the trx associated to the bcsu are stuck ie in BL-TRX.20th April 2010 at 15:19 #44960sathyajithGuest
What is mean by BL-RSL21st April 2010 at 05:57 #44961BijoyGuest
Blocked-Radio Signalling Link.
This means LAPD failure has occured2nd August 2010 at 14:09 #44962lalitGuest
i am trainee in vodafone bts and i want to know trx rectification,power supply rectification,rectification of jumper,making of connector,vswr rectification,feeder rectification,feeder rectification,antenna port rectification.
Please Help Me17th August 2010 at 12:09 #44963senthiklGuest
bts means17th August 2010 at 12:22 #44964karthikGuest
i want to know function of e1 in cell site and where it is connected ……… please anyone help me27th September 2010 at 12:27 #44965SteveGuest
What is the function of the HiT?30th January 2013 at 13:36 #44966FarazGuest
can anyone tell me how I can create a PQ1 in NOKIA bsc for a site or FIU 19?31st January 2013 at 18:19 #44967pritamGuest
hi rahul,which software is running in you bsc.
this is a bsc software bug…6th September 2013 at 04:14 #44968srinivasGuest
i want larne bsc& msc Pls Help mi