- This topic has 147 replies, 1 voice, and was last updated 1 year, 6 months ago by MMK.
27th March 2007 at 13:47 #43065AkashGuest
Thanks neeraj your answers are very good ,it encouraging a fresher thanks alot…..27th March 2007 at 14:39 #43066syam prakashGuest
in bts cablings(i.e.m2la to dvja)we had to give to connections if any probie appear28th March 2007 at 09:47 #43067prabaharanGuest
how many subscribers wil using the carriers at the same time in nortel bts. and then i don’t know how to calculate30th March 2007 at 02:12 #43068korwilis ChaniagoGuest
i am still confuse as we know, power from BTS come from rectifier..refer to patrick expalanation how big power we need in KVA we need or how many Amper 3 phase, Mcb that we must use..
thanks for your help and explanation5th April 2007 at 08:28 #43069Hisamuddin AhmedGuest
can anyone tell me if i can use the output of RRI to get 2 Mbps unframed E1 (G.703)?5th April 2007 at 12:59 #43070ziaGuest
why 48volt used in GSM7th April 2007 at 05:13 #43071M. RAMAJAYAM GTLGuest
I think your fresher to telecom field, all the telecom equipment using -48 v standard , the volatage range in 48 v dc human body withstanding voltage more than this voltage you feel shock, below this volage system takes more currunt so we need to uncrease the conductor size so we are using 48 v dc ( why exactly 48 , the dc system normal standard is 6v, 12v, 24v, 48v. this is the systematic dc .7th April 2007 at 11:38 #43072pavankumarGuest
what is ECT and ECI in CDMA HUAWEI MSC ptotocols meant for?11th April 2007 at 07:19 #43073GurjinderGuest
I want to know the difference
between main Rx and diversity Rx refers to nokia ultrasite BTS.
Thanks and Regards,
Gurjinder12th April 2007 at 16:53 #43074PixGuest
Rx-Div and Rx-Main are two receving signals coming from two different branches of the antenna system.
Those 2 signals are combined in the “combiner” in order to provide a “better” RX signal.
This is a very typical solution to improve the sensitivity of a BTS.15th April 2007 at 06:39 #43075jainal M.Guest
hi. good day,
can any body explain what is this for ? In flexihopper there is pop ups ” outdoor flexihopper FE=3 installed but not pressent” this pop ups is bothering us. There is no clear alarms appeard….
Thank you very much…15th May 2007 at 08:24 #43076Parag PatelGuest
I want to know differences of BTS model Ultrasite Edge FXC RRI 2+2+2, Ultrsite 444 of Nokia11th April 2020 at 16:11 #71773MMKGuest
I have a query regarding the FXC E1 and FXC E1/T1.
Our client has a tetra cassidian/ nokia base station. The card used is FXC E1/T1 120 ohm.
Can we use 75 ohm FXC E1 card in replacement of it.
What do we have to do in changing the cables. Will it work instead or we should be using 120ohm FXC E1T1 Only.