Generic selectors
Exact matches only
Search in title
Search in content

GSM Backbone synchronization&Time delay

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #42299 Reply

    Could you explain GSM Backbone synchronization & Time delay


    #42300 Reply

    HI Ayman,

    As far as i know , each equipment in the n/w has to be sync’d to teh master clk . The Master clk can be derived from PSTN PCM streams then MSC -XCDR- BSC-BTS . The interconnecting backbone equipments also has to derive the clk from the E1s which interconnect the above elements .

    In case on Siemens STM equipments the E1s are selected and priority is fixed to sync the STM nodes . as the STM packed structure requires clk for exactly reproducing the STM packets .

    secondly the delay , i think it should be propogation delay , when a signal passes from one end of the node to the other node . the signal has to travel a distance , which induces a time delay . further in case of Repeater stations the signals are first captured then reshaped – amplified and reproduced , for these process ,time is required . hence time delay .

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: GSM Backbone synchronization&Time delay
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">