- This topic has 21 replies, 1 voice, and was last updated 5 years, 1 month ago by
ankit.
-
AuthorPosts
-
visu
GuestDear Friends
Also please give me the details as how many E1 links are required to connect BSC’s with MSC and how it is connected and also about A interface.
S.Vijay
Guestvisu
GuestIt is not number constraint. Suppose if I want to connect 100 BTS and these 100 BTS are connected to 20 BSC. please reply friends
S.Vijay
GuestNowadays…people use 300 TRX with a Single BSC….
You are talking abt 20BSC – 100 BTS…
Common Man…
Serch for Jhon Scourious – Information on GSM Network …You can get whatever you want.
Rgds
porkodi
GuestHi vijay,
Consider the following scenrio if i am connecting the 1 BTS to the BSC through using 2 E1’s.How many E1’s should i connect between BSC and MSC.I know that using one BSC we can connect many TRX’s.So consider the above scenrio plz
Regards,
PorkodiS.Vijay
GuestI am serious now…I am a switch Guy…let me give you what I know…
Dear Porkodi ( Are you from TamilNadu ),
Lets Say :-
***********1 BTS with 2+2+2 Configuration.
2+2+2 Means 3 Sectors and 2 ARFCN/TRX Per Sector.So Per Sector 2*8 Time slots.
So that BTS has 2*8*3 TimeSlots.Total TS=48 in AIR Interface.
In each sector dedicate 2 TS For BCCH and SDDCH.So remaining = 48-(2*3)=42 Speech TS in AIR Interface.
Rgds…TBC…
S.Vijay
GuestNow Between BTS and BSC :
*************************Lets say One PCM is there.
BTS Can put 4 Air Interface TimeSlots ( 16 K) in one PCM TimeSlot (64k).Got it…
So 42 AIR TS fixed in 11 PCM TS.
Ok add one more PCM TS For BCCH+SDDCH.(Let me be lavish)So Total 12 PCM TS for One BTS with 2+2+2 Config.
Ok…
TBC…
S.Vijay
GuestNow Between BSC-TRA-MSC :-
**************************BSC Recives those ( 12 PCM TS[64 k] ) 42 AIR TS in 16 K Rate.
BSC Have to transfer them to 64 K Rate for MSC SWITCHING PURPOSE.
BSC connects TRA Internally ( ERICSSON SWITCH).42 AIR TS in 16 K transfered to 42 – 64 K TimeSlot.
So you need 2 PCMs between BSC and MSC ( still arnd 18/19 TS will be free for you ).
…..What do you think guys.
I should charge USD-500 as training FEE.Rgds
Palani
GuestWhat if Between BTS and BSC, you’ve got E1 link (instead of One PCM)?
Since you have 42 Speech TS in AIR Interface, you will need 2x E1, agree?S.Vijay
GuestPalani Anna…
E1=PCM – Same Yaar
Palani
Guest😛
kshitij
GuestThanks for ur valauble explanation sir. can i have ur Email ID for any future queries.
Porkodi
GuestHi,
thanks for your answer.May be in future i will ask more questions in switch part.Thanks & Regards
PorkodiNeuil
GuestVijay, is below summary correct?
Between BTS and BSC :
*********************
Need 2 PCMsBetween BSC-TRA-MSC :
*********************
Also need 2 PCMsS.Vijay
GuestHI Neuil,
Nice Question.I cannopt give you exact things…but for basics..
Between BTS and BSC :
*********************Number of TS =NTS
Number of PCM = (NTS/4)/30
Round it to next Integer.
Like if you get 0.7 RESULT=1.
If you gert 1.3 RESULT=2.
Thi is not exact but use this for gainming knowledge.In practical…you may see different things.Between BSC(TRA)-MSC :
*********************Think that TRA Always inside BSC.
Number of Ater/A Interface PCM =
( Number of Traffic TS in AIR Interface ) / 30.
This is BASICs ok…
-
AuthorPosts