Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

2206 and 2202 internal operation

Viewing 15 posts - 271 through 285 (of 304 total)
1 2 3 … 18 19 20 21
  • Author
    Posts
  • 9th January 2007 at 16:37 #39068
    zak
    Guest

    hi i want know the value of the power for (TRU TX )output both 2202,2206 (900,1800)

    11th January 2007 at 04:20 #39069
    Jimi
    Guest

    Hi All,

    I need the photos of Based Transceiver Station, Ultrasite, Flexihopper, or anything still relating with the networks.
    Please help me.

    Best Regards,
    Jimi Adhityajaya

    11th January 2007 at 09:01 #39070
    raja
    Guest

    kindly tell me how many bts or trxs can be connected to a BSC

    17th January 2007 at 16:27 #39071
    ALEX
    Guest

    Can any one give me information about “Late TCH assignment” .

    18th January 2007 at 06:08 #39072
    Mentor
    Guest

    How many BTS or TRX can be connected? It depends on what type of BSC it is. For example Ericsson BSC supports 1024 TRX and if it is mega BSC then it will support 2048 TRX

    17th February 2007 at 13:52 #39073
    sandeep bhati
    Guest

    what is ssi value ingsn 900.how to make cross conection

    1st March 2007 at 09:30 #39074
    gulshan arora
    Guest

    hello sir,
    i m knowing abt the bts n transmisson rack.wud u plz giving me some note abts this.i will e really thankful to u.

    2nd March 2007 at 06:36 #39075
    DILIP
    Guest

    HELLO SIR/MAM,
    CAN U TELL ME THAT WHY WE R USING -48 VOLT DC SUPPLY TO BTS MOTOROLA HORIZON-2 .
    WHY USING DC SUPPLY
    PZ TELL ME IN DETALIS

    2nd March 2007 at 12:00 #39076
    patrick
    Guest

    DILIP – 2 Mar 2007

    Because voltage in telecom is -48vdc.

    it is standart.

    4th March 2007 at 22:11 #39077
    ken
    Guest

    and also +24VDC supply is being used on most BTS. take ericsson rbs2000 series for example.. they are using either +24VDC or -48VDC. but even if it is supplied by -48VDC the PSU is converting -48VDC to +24VDC. if +24VDC, the PSU is supplied by 220VAC and then converted to +24VDC.

    9th March 2007 at 04:13 #39078
    aadi
    Guest

    HI ALL,

    I’d like to know about the RBS 2204, RBS 2206. May anyone give me Info. about how the system works? how the RF signals flow in and out? Input/Output power levels, receive sensitivity level.
    I want to know about the functioning of the duplexer, multicoupler, combiner and the TRX cards, and ect. Ericsson.

    your’s truly
    aadi

    18th March 2007 at 11:35 #39079
    Dhiraj
    Guest

    HI ALL,

    I’d like to know about the RBS 2204, RBS 2206. May anyone give me Info. about how the system works? how the RF signals flow in and out? Input/Output power levels, receive sensitivity level.
    I want to know about the functioning of the duplexer, multicoupler, combiner and the TRX cards, and ect. Ericsson.

    your’s truly
    Dhiraj

    21st March 2007 at 09:48 #39080
    Steve S
    Guest

    Does anyone know the voltages for the I/O alarms on the RBS2000 Series. I believe they are 5v

    23rd March 2007 at 10:46 #39081
    Michael
    Guest

    Hi Andi,
    RX diversity lost issue relate to an anomally on the receiver path.Its is similar to VSWR but for its occurrence on the RX path. Try and swap your TX leg for RX and monitor if VSWR alarm will come up. If this happens it then means there is a problem on the feeder line and a feeder/Antenna sweep should be done.
    You should also do a Diversity Supervision measurement on the affected TRX.

    24th March 2007 at 11:41 #39082
    manoj mishra
    Guest

    what is vswr.

  • Author
    Posts
Viewing 15 posts - 271 through 285 (of 304 total)
1 2 3 … 18 19 20 21
  • The forum ‘Telecom Design’ is closed to new topics and replies.