Hi Pix,
I was tried to change the PC parameters for some cells with high DL quality drops but there is no improvement for them…
My current setting for this cells are :
A_LEV_PC (SACCH)=3
A_QUAL_PC (SACCH)=3
BS_P_CON_ACK (x 2 SACCH)=2
BS_P_CON_INTERVAL (x 2 SACCH)=1
EN_BS_PC =ENABLE
EN_MS_PC =ENABLE
L_RXLEVDLP (dBm)=-85
L_RXLEVULP (dBm) =-95
L_RXQUALDLP=2
L_RXQUALULP=2
MAX_POWER_INC (dB)=8
MAX_POWER_RED (dB)=4
MS_P_CON_ACK (x 2 SACCH)=2
MS_P_CON_INTERVAL (x 2 SACCH)=1
POW_INC_STEP_SIZE (dB)=6
POWER_INC_FACTOR =0.8
POWER_RED_FACTOR =0.5
POWER_RED_STEP (dB)=2
PWRC=NOT_INCLUDED
U_RXLEVDLP (dBm)=-75
U_RXLEVULP (dBm) =-85
U_RXQUALDLP=1
U_RXQUALULP=1
W_LEV_PC =1
W_QUAL_PC=1
Are they correct ?
Best regards,
>>rrb_bg