Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Reply To: SD Mean Hold Time


HI Pix,

Thanks for your inputs.
The MHT is not high for all the cells of the BSC but for most of the cells.
There are 30 BSCs in the network, and MHT ranges from 3.5 sec to 7.5 sec (highest for this BSC).

Yes, there are quite a few TCH Call queuing attempts; shall I activate HR on those cells to eliminate queuing attempts and reduce MHT?

The OMU/BCSU/MCMU load for this BSC is just a little higher than that of other BSCs.

I am also trying to extract the setting of T11 and T11_forced but these timers are not modifiable, no?