Layer 3:-
MS1
System Information Type 3
Time : 10:35:45.42
Vendor Header
ARFCN : 594 (GSM 1800)
L2 pseudo length : 18
Skip indicator : 0
Protocol discriminator : (6) Radio resources management messages
Message type : 27
Cell identity (CI) : 13441 (Hex 0x3481)
Location Area Identification
Mobile country code (MCC) : 405
Mobile network code (MNC) : 027
Location area code (LAC) : 101 (Hex 0x0065)
Control Channel Description
MSCR : (1) MSC is Release ’99 onwards
Attach/detach allowed (ATT) : (1) MSs in the cell shall apply IMSI attach and detach procedure
BS-AG-BLKS-RES : 2
CCCH-CONF : (2) 2 basic physical channels used for CCCH, not combined with SDCCHs
CBQ3 : (0) Iu mode not supported
BS-PA-MFRMS : 2 multiframes period
T3212 timeout value : (15) 1.5 hours
Cell options (BCCH)
Dynamic ARFCN mapping indicator (DN-IND) : (0) Dynamic ARFCN mapping is not used by the PLMN
Power control indicator (PWRC) : (0) PWRC Not set
DTX indicator : (1) The MSs shall use uplink discontinuous transmission
RADIO-LINK-TIMEOUT : 44
Cell selection parameters
CELL-RESELECT-HYSTERESIS : 14 dB Rxlev hysteresis for LA-reselection
MS-TXPWR-MAX-CCH : 0
ADDITIONAL RESELECT PARAM IND (ACS) : (0) System information type 16 and 17 are not broadcast on the BCCH
HALF RATE SUPPORT (NECI) : (0) New establishment causes are not supported
RXLEV-ACCESS-MIN : 8
RACH control parameters
Max retransmission : (2) Maximum 4 retransmissions
Tx-integer : (12) 20 slots used
Cell bar access : (0) Not barred
Call reestablishment : (0) Allowed
Access control
Emergency Call allowed : (0) All MSs
Barred classes :
Rest Octets
Selection Parameters
cbq : 0
Cell reselection offset : (5) 10 dB
Temporary offset : (1) 10 dB
Penalty time : (0) 20 s
System Information 2ter indicator – Not Available
Early classmark sending control – Explicity accepted
BCCH scheduling is not sent in SI9
GPRS indicator
RA color : 0
SI13 position : (0) SI13 message is sent on BCCH Norm
Neither UTRAN nor CDMA2000 classmark change message shall be sent with the Early classmark sending
SI2QInd
SI2 Quater Position : (0) SI2 quater message is sent on BCCH Norm
Message dump (Hex):
06 1B 34 81 04 75 20 00 65 D2
00 0F 1A E0 08 B0 00 00 85 20
00 0B
MS1
Time: 10:35:45.42
Blocked Call
Block type: No Immediate Assignment