Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Reply To: Drop due to BBS Interm/RTC – in ALU

#65956
pix
Guest

hi,

BSS Drop RTC are due to HW failures…
1/ either a faulty board in the BTS, in the BSC or in the TC
2/ or a faulty interface : Abis or AterMux failures

–> you cannot fix this with a parameter.
If you can find which board or interface is faulty, you could lock it and transfer the load to another board.

BSS Drop due to internal failures are usually due to O&M commands (lock/unlock/reset/restart).

Priority : fix your HW failures, and once it is done (–> rtc drop = 0), check if the “internal failures” are still there. Cuz they might be a side-effect of the “RTC drop” problem.

regards
pix