Dear Sunny,
Well, based on your statement, we can set in a nodeB with 2 different SFs, SF16 and SF32. Am I right?
But as I know, we can set only one SF. If we can set the SF more than 1, what specific indicator is that?
In Huawei, SF setting is like this :
List cell LDR algorithm parameters. Cell ID is 0.
LST CELLLDR: CELLID=0, LSTFORMAT=VERTICAL;
%%LST CELLLDR: CELLID=0, LSTFORMAT=VERTICAL;%%
RETCODE = 0 Execution succeeded.
List Cell LDR Algorithm Parameters
———————————-
Cell ID = 0
Cell name = cell1
DL LDR first action = CODE ADJUST
DL LDR second action = BE TRAFF RATE REDUCTION
DL LDR third action = INTER-FREQ LOAD HANDOVER
DL LDR fourth action = NO ACTION
DL LDR Fifth action = NO ACTION
DL LDR Sixth action = NO ACTION
DL LDR Seventh action = NO ACTION
DL LDR Eighth action = NO ACTION
DL LDR Ninth action = NO ACTION
DL LDR Tenth action = NO ACTION
DL LDR-BE rate reduction RAB number = 1
DL LDR un-ctrl RT Qos re-nego RAB num = 1
DL CS should be ho user number = 3
DL PS should be ho user number = 1
DL LDR-AMR rate reduction RAB number = 1
DL CS should not be ho user number = 3
DL PS should not be ho user number = 1
UL LDR first action = INTER-FREQ LOAD HANDOVER
UL LDR second action = BE TRAFF RATE REDUCTION
UL LDR third action = NO ACTION
UL LDR fourth action = NO ACTION
UL LDR Fifth action = NO ACTION
UL LDR Sixth action = NO ACTION
UL LDR Seventh action = NO ACTION
UL LDR Eighth action = NO ACTION
UL LDR-BE rate reduction RAB number = 1
UL LDR un-ctrl RT Qos re-nego RAB num = 1
UL CS should be ho user number = 3
UL PS should be ho user number = 1
UL LDR-AMR rate reduction RAB number = 1
UL CS ishould not be ho user number = 3
UL PS should not be ho user number = 1
UL HHO load space threshold[%] = 20
DL HHO load space threshold[%] = 20
UL HHO maximum bindwidths[bps] = 200000
DL HHO maximum bindwidths[bps] = 200000
MBMS decsend power rab threshold = 1
Cell LDR SF reserved threshold = SF8
LDR code priority indicator = FALSE
Max user number of code adjust = 1
Ul LDR Credit SF reserved threshold = SF8
Dl LDR Credit SF reserved threshold = SF8
(Number of results = 1)
— END
Thanks alot Sunny!,
Paul