Hi Pix,
I have some doubt in MS power control at BSC. We are intended to use the closed loop power algorithm at BSC(mentioned in 3GPP. 45.008 annex B.2 ) for MS power control .according to this algo.
The output power will than be:
P = 0 – CH
In this case, CH is the actual power level (relative to 0 ) commanded by network.
So our understanding is that if BSC intially set the required power level 0 = 30db, and it receive the power P from MS = 28db. Then n/w should command the power CH = 32db to the MS.
So please let me know whether we are correct in our understanding or not?