I am using Ericsson Remote OMT R20 for one year now and it works ok, when connected directly to BSC RBLT port. Cross-connection, any time slot from 1-15 and 17-31 for ROMT R20, to target RBS is made only on the same BSC.
Attempt to connect to target RBS on another BSC over SDH transsmition system was failed.
Ericsson staff answered that it is possible but not practical and the propossed sollution is to equip each BSC with one Remote OMT PC computer.
Does anyone have information about Thor2 Board Pre-installation settings to enable Ericsson BSCSimII application?