Something wrong with puting all logs in this webpage.
My config is as follows:
interface BRI2/0
no ip address
ip nbar protocol-discovery
isdn switch-type basic-net3
isdn overlap-receiving
isdn protocol-emulate network
isdn layer1-emulate network
isdn incoming-voice voice
isdn map address . plan isdn type national
isdn static-tei 0
isdn timeout-signaling
isdn skipsend-idverify
dial-peer voice 1 voip
destination-pattern .T
session target ras
dtmf-relay h245-signal h245-alphanumeric
codec g729br8
!
dial-peer voice 10 pots
permission orig
huntstop
destination-pattern 99999
port 2/0
There is no translation rule set.
I’ve spent many hours struggling with this case, unfortunately without any success.
Does anyone have any ideas what might be the problem?
Thank You,
Mac.