Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Reply To: Telnet A800 for CDR


That is not the A800. You are ,most likely,talking to the ADSLrouter/modem.

When you talk to the A800, the telnet screen will look like this:

Welcome to Tenor Multipath Switch Telnet Server
Serial #: A002-xxxxxC | Name: xxxxxxxxxl01 | Type: A400 | UTC: Unknown
Connected from IpAddr/Port# to Port# 23

Quintum:xxxxxxxx101> Password:

If you get a null modem cable, you could do the same from the console port.

From a COM port on your PC or laptop, using a null modem cable. setup it for 9600, no parity, one stop and one start bit.