Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HR

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #56714
    Awacs
    Guest

    Plz tell me when half rate is triggered…Is it when all timeslots on BCCH and TCH Trx are full?

    #56715
    TNS
    Guest

    Hi,

    There is a treshold in % ( busy TS / all TS available )above which the new TCH assingment is HR.

    BR,

    #56716
    Farkhat
    Guest

    It should be 2 treshholds, upper and lower, to determine hysteresis

    #56717
    Manu
    Guest

    rightly said by Farhan thats FRL & FRU in case of NOKIA.

    #56718
    milenio
    Guest

    In Ericsson BSS there are 2 thresholds: one for allocating new calls on HR,and the other one for reconfiguration of existing calls in a cell on HR, when number of idle TS is lower than the value pointed with these thresholds.

    #56719
    Farkhat
    Guest

    Manu, FRL&FRU are cell level thresholds, there are 2 more – HRL&HRU which are BSC level thresholds. If FRL&FRU are not set (100&0) then BSC level thresholds are used.

    #56720
    Manu
    Guest

    thats rite farkhat.

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.