Generic selectors
Exact matches only
Search in title
Search in content

Lan Telephony – DMZ Issue

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #27255 Reply
    MMA
    Guest

    I would like to ask a question I have about the usage of LAN Telephony – DMZ Issue. We have a service based on IP Phones and analaog adaptor. Many of the users are behind a router on a LAN. The outgoing services work fine but when it comes to incoming calls on the IP (On-Net) calls, If the device is on DMZ it works and if not, it does not. We currently use H323 standard. Someone advice me to migrate to SIP as they told me that user wont need to DMZ in order to receive the calls from other IP Phone users. We are not ready to migrate to SIUP at this moment. Also we have a lot of users who travel and stay at hotels and they do have LAN connections there but no DMZ facility. Please advise if someone has experience on this and how to overcome. What options are available?

    Regards,
    MMA

    #27256 Reply
    Noname
    Guest

    If you control the receiving end of the calls,like calls from hotels to your gateway or call relay, there is a very easy,simple and not too expensive solution: VPN router.

    Get a cheap VPN router, put the VPN router on the customer premise, betwen the I.P. phone and the LAN/internet.

    On your gateway, put another VPN router on front of the gateway.

    The customer will “tunnel”trought the NAT and even some firewalls, for sure they will go trought the hotels NAT.

    The drawback: Use of bandwith will be higher, because the VPN encapsulation and encription .
    If yu could find a router that does tunneling without using any encription, that will be perfect, but so far I have not found any.

    If you need any help, write to mike3799@yahoo.com

    I do not sell the service,just in case.

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Reply #27256 in Lan Telephony – DMZ Issue
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">