Generic selectors
Exact matches only
Search in title
Search in content

Need Answer Supervision on iEnsemble!!

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #25105 Reply
    iE
    Guest

    We are using an iEnsemble box for origination pusposes. But the problem is that every customer demands to have answer supervision on our gateway and the iEnsemble’s don’t come with Answer Supervision. Is there any way, we can put answer supervision on our iEnsemble!! Please help us!!! Any replies will be appreciated. Thank you!!!

    #25106 Reply
    iE
    Guest

    Sorry we are using our iEnsemble for Taermination.

    #25107 Reply
    Stefan
    Guest

    iE has very limited Answering supervision. Foe each call you should wait up to 5-6 sec, before iE detect that yhere are no Ring tone any more (if someone answer to call).
    Flash Horizon/Vive offers some Dialers/LCR whic can detect Voice, so you should order Dialer for each FXS port and connect it to iE. So iE should send call to Dialesr and dialer will detect voice and this will make aceptable accuracy for CDR. Dialer should dent Reverse polarity as status when call is answered.
    In IP script do not use Answer Connect.
    use xdefault answerconnect ON

    #25108 Reply
    Tigran
    Guest

    Hello,
    I suffered too much on making iE recognize the call status. Only busy tone could be detected properely and quickly. Other tones could be detected…but very-very hard and very late (5-6 seconds).. Also there is another problem: The caller won’t hear any sound before the billing goes…the speach (as well as the ring tones) are heard only after the billing is started…
    So you can’t rely on its built-in answer supervision…that would be just a waste of time..

    Regards,
    Tigran Kocharyan

    #25109 Reply
    Stiv
    Guest

    iE has these dificulties wirh Answering supervision, so is not perfect solution for receiving VoIP traffic. If you like to sent VoIP calls, for this scenario iE is quite good solution, especialy if calls going to Cisco or other iE.
    CDRs are accurate and quality is good as with any other vendor.

    Recommendation: DO not use it for receiving Traffic

Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: Reply #25109 in Need Answer Supervision on iEnsemble!!
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">