- This topic is empty.
16th December 2002 at 05:32 #22738bilal SheikhGuest
can i get Tenor A800 quintum configuration if ic an get complete sample configuration i can modify it accordingly
plz help me
bilal23rd December 2002 at 11:54 #22739steedGuest
does any one know the minimum bandwidth required for Tenor A800 to use 8 PSTN lines?
How good is QBill with Tenors? I would like to know where can i get QBill Manual to download.
Steed23rd December 2002 at 16:40 #22740JareerGuest
I have DSL(PPPoE) w/1 static IP and trying to connect a linksys router using NAT to my A800, I allowed all ports quintum requires, I hit my radius but can’t reach my other gateway, where am I going wrong here? Help please!!!
Jareer1st January 2003 at 03:17 #22741JeffGuest
Let me know what you want to do so I can provide you a sample.
Qbill is not bad but we have a solution as well. Drop me a line if you are interested.
We have the A800 working with a $40 router/firewall over cable modem. Drop me a line to discuss.1st January 2003 at 09:15 #22742MaxieGuest
For Q-Bill User Guide and other information on Q-Bill, you should write to Andres Sandoval at
He can also give you an on-line demo of Q-Bill.
We are very happy with Q-Bill for our ITSP business in Uruguay and Yugoslavia.31st May 2003 at 03:25 #22743CarolinaGuest
i need to know how can i configure my AS800 quintum to send fax over ip, and how can i generate a fake ringback tone..
Please if anyone can help me let me know, my email is:31st May 2003 at 14:33 #22744despoGuest
hi can anyone send me a doc on configuaring a A800.specifically for a calling card system.and also how to put a prefix number infront.3rd June 2003 at 19:42 #22745EdwinGuest
I need to know how to configure A800 quintum to enable the CDR facility, please help
my mail is:
firstname.lastname@example.org June 2003 at 20:53 #22746devaGuest
Despo, drop me a line so I can perhaps help out. email@example.com June 2003 at 08:59 #22747Assanjie GulawitaGuest
Pls help me to do the sample configaration for Quintum A 400
To do billing. to send faxes, presently pstn line want hang off25th June 2003 at 05:07 #22748AlbertoGuest
How can I copy the entire configuration from one A800 to another?
Thanks in advance for any help with this25th June 2003 at 05:17 #22749AlbertoGuest
For all of us looking for A800 documentation, in the link below you can find the entire CLI (Command Line Interface) docs. Is a PDF file with 222 pages.
ALMOST anything you need to configure your Quintum Tenor A800. Good luck!7th July 2003 at 16:57 #22750begra8flGuest
I think Tenor A800 requires 16kbps for each line. 8lines would require 128kbps.7th July 2003 at 17:00 #22751begra8flGuest
Please can you share your experience with me on configuring a Tenor A800 conected to a Private LAN through a Linksys Router.
begra8fl11th July 2003 at 04:45 #22752Mat HitchcockGuest
To copy a complete gateway set up to another unit copy the db.bin file using ftp.
Download it from the configured unit onto your PC and then upload to the new gateway.
We are running the Official Quintum Training Course in the UK – see the Commercial Forum for full details.