Generic selectors
Exact matches only
Search in title
Search in content

Router to PABX Distance

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #20778 Reply

    Hi there,

    We are in the process of upgrading our VOIP network because of increased demand. The problem that we have is that the PABX is some 200-m away from the router. Due to some physical limitations we can not bring these items any closer. We intend to employ E1 cards in the router (Cisco 3640) as well as the PABX. The PABX vendor has indicated that there is no problem with that kind of distance. However, we are not sure about the router E1 capability in pumping baseband data at 2048 kbps over 200-m (650 feet). We need your help please.

    #20779 Reply

    Should be no problem, just set your cable length to long. I forgot the IOS command but its under the controller t1 config.

    #20780 Reply
    James Ballash

    Another method would be to use a media converter to fiber or to install a repeater at the router to boost the signal

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Reply #20779 in Router to PABX Distance
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">