- This topic has 54 replies, 1 voice, and was last updated 16 years, 5 months ago by pix.
-
AuthorPosts
-
22nd March 2004 at 11:42 #37684artisteGuest
hi,
i have a cell with SD cong. there is no problem of L.U. and no problem with number of channels SDCCh because the channels SD are never busy. I dont have a traffic SMS and i dont know what is the problem.
please tell me what is the solution
Thanks.24th March 2004 at 07:24 #37685MisaGuestWhy did you know that there is SD cong. in a cell?
24th March 2004 at 11:25 #37686artisteGuesthi misa,
i know that there is a congestion SD on a cell because i have 70% on SDCCH assignement congestion failure.But i have the solution now, by tunning RXLEVACCESSMIN and max retrans.
but if you have an idea it will be good.28th March 2004 at 13:18 #37687MisaGuestOK, the max_retrans value is used in the channel request procedure and cell re-selection procedure, but the rxlev_access_min is used only in the cell selection procedure, so I think tunning of the rxlev_access_min does not help in your problem. And BTW, your problem must not be called “SDCCH congestion”.
30th March 2004 at 14:30 #37688gezaGuestmaybe hardware problem?
10th April 2004 at 08:31 #37689HAMIDGuestMY BE VLR OVELOAD OR C7 OVERLOAD
13th April 2004 at 09:41 #37690frededrick mbogoGuestwould you help me on the this issues:
I have 1E1 which is obviously has 31 timeslots. How many TRXs would be supported in a site?
13th April 2004 at 18:12 #37691MostafaGuestHi Frederick,
The Nbre of TRXs supported by 1 E1 depends on wich kind of LAPD signalling is used:
1- If it’s multiplexed, so each TRX need 2 TS .
2- If it’s concentrated one , we have as estimation 2.25 TS for each TRX.17th April 2004 at 12:54 #37692waleedGuestdear mostafa as i know in ericsson if you are using multiplaxing you can use 15 TRUs,in case of concentrating you can use 13 TRUs and in case of unconcentrating you can use 10 TRUs
26th April 2004 at 12:00 #37693artisteGuesthi Misa,
i wase not here, but i can explain why i call this problem SDCCH CONG.
if you have RXLEVACCESSMIN=-110dBm and some MS trying to acceed to the network with level between -100 and -110, BSC allowe an SDCCH during (T3101) and the link is lost. many cases like this can block 8 sdcch if you have 1 trx or 2 TRX in one site whithout neighboor.(i use this cell in SAHARA for some offices)
so RXLEV ACCESS MIN wase the solution to reject MS whith bad signal. I can use RACH TA FILTER but i prefer this solution. Excuse my english i speak only in french.
thank you.26th April 2004 at 19:18 #37694MuziGuestGood People
I just read this article answers.I am impressed.As you can remember Hamid,the SDCCH/TCH congestion are my everyday thoughts about actions to be taken to solve the problem.
9th July 2006 at 08:19 #37695yogesh singhGuesti am finding high values of SDCCH RF LOSS RATE and TCH RF LOSS RATE in OMC-R Statistics.kindly suggest solutions.can decreasing rxlev access min. can help,present value rxlev access min.is 2.
10th July 2006 at 21:21 #37696patrickGuestis it a really congestion or failure SDCCH?
(i speak french too 😉 )
11th July 2006 at 06:11 #37697yogesh singhGuestNo congestion SDCCH or TCH,SITE IS 2/2/2/,NO hopping.All sectors showing pblm.,so no case of Interference,Other OMC-R statistics are ok(HSR,CDR).
11th July 2006 at 09:00 #37698ManojGuestYogesh you need to check the radio .Change the radio or try changing the BCCH to the other radio
-
AuthorPosts
- The forum ‘Telecom Design’ is closed to new topics and replies.