Generic selectors
Exact matches only
Search in title
Search in content

SS7 Signalling Dimensioning

  • This topic is empty.
Viewing 15 posts - 61 through 75 (of 77 total)
  • Author
    Posts
  • #37100 Reply
    Jose
    Guest

    Hello,

    can you help me to confirm which is the ITU-T recommendation mentionated by Tariq?

    BR//José.

    #37101 Reply
    jagdish
    Guest

    hi , I have a question , that is – How many maximum number of HSL (high speed links ) can be created between two Nodes . and why …

    #37102 Reply
    B Dasu
    Guest

    for 1 Signaling link(64kbps)= earlang is 0.189 then what will be the earlang for HSL link.(2mbps)

    #37103 Reply
    diggy
    Guest

    can some help me on the following:

    1. if a mobile node ( e. HLR) is equipped with say 4 ASPs ( application server process)how many associations can be created towards other NEs such as SMSC,IN,MSC server, etc..

    #37104 Reply
    pradeep
    Guest

    in cas ts16 carries only signalling data of 2 ts but signalling of 30 ts are done in a multiframe of 16 frames

    #37105 Reply
    Dinesh
    Guest

    Can anyone tell me the signalling link capacity of 1 HSL, in terms of Erlang or number of SMS

    #37106 Reply
    NIHIT SRIVASTAVA
    Guest

    What is the capacity in erlangs of one HSL as LSL have 1 erlang capacity wrt 1 link?

    #37107 Reply
    Deebendu Kumar
    Guest

    Hi,

    I am looking for tool to calculate ss7 link per erlang.

    #37108 Reply
    shunmugom
    Guest

    Good evening to all, can you tell me how to restrict voice channels in SS7 Signalling link

    #37109 Reply
    Mick
    Guest

    to shunmugom

    if we consider ONLY the voice channels, without ANY other services, that a one SS7 link can serve up to 1 500 voice channels

    #37110 Reply
    Dinesh
    Guest

    How can we improve the paging performence

    #37111 Reply
    Jeet
    Guest

    pls clarify, to calculate SS7 signaling link load on a particular link..why Max of Tx or Rx Octets is taken instead of sum of Tx & Rx Octets?

    Formula sig link load: (Max of Tx or Rx Octets)+ 7*MSU / Tin * 60 * 8000. You use the attached tool (c7tm.exe) for this purpose.

    #37112 Reply
    Bijoy
    Guest

    Hi Jeet.
    This is due to the counter design.The counters Octets RX/TX are accumulation counters which take sum of all RX/TX octets for a given duration.

    In case,at any time if any of your SL reaches(TX/RX) > 0.2 Erl(or whatever the threshold set),an SL congestion/overload alarm is set.

    Br\\
    Bijoy

    #37113 Reply
    Sanket
    Guest

    I have 23 MSU for a call and the max load is 8 calls per second. Average MSU size is 120 bytes.
    The max loading on one link should be 40%.

    Based on the above data, can anyone tell me how many LSL (64kbps) links will be required to cater the above traffic. Thanks.

    #37114 Reply
    Ganisa
    Guest

    Can any one tell me what is the maximum number of E1s that can be connected to one signaling link in SS7 network. thank you

Viewing 15 posts - 61 through 75 (of 77 total)
Reply To: Reply #37046 in SS7 Signalling Dimensioning
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">