Generic selectors
Exact matches only
Search in title
Search in content

VAMOS calculation

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #68862 Reply
    ahmed moa’ed
    Guest

    dears
    kindly , Do you have new information about the VAMOS calculation

    #68863 Reply
    fede
    Guest

    hi ahmed,
    what do you mean for “vamos calculation” ?
    calculation of available channels ?

    #68864 Reply
    ahmed moaed
    Guest

    hi fede

    sure u know half rate which divide the time slot into to parts,the VAMOS technique divide the time slot into 4 part
    now ,i need to calculate the available TCH when we apply this technique and whats the side effect of it

    #68865 Reply
    fede
    Guest

    Ok, you’re right, basically you can double the cs channels.
    The effect will be some additional interference, I suppose.
    But if someone has more experience about that, I am interested in his feedback too.

    #68866 Reply
    pix
    Guest

    at most each ts can be divided in four, if HR + VAMOS is used.

    some users won’t be able to go on a VAMOS HR channel, due to too bad UL or DL quality. It’s like a kind of soft-congestion.

    I don’t know what is the typical ratio that can be applied, instead of x4. Perhaps x3…?

    Hand-on tests would be really useful 🙂

    #68867 Reply
    ater
    Guest

    guys this is not an easy guess
    Tipically in average radio conditions you would get a 20/30% of increase in capacity. Because you need couples of of mobiles with similar radio conditions to be paired in te same hr channel. This situation is no always achieved so practically you are not going to double your voice capacity
    You will need new abis features and upgrade your BSCs with packet gateways

Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: Reply #68863 in VAMOS calculation
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">