Generic selectors
Exact matches only
Search in title
Search in content

RF Engineer Interview Questions

  • This topic has 8 replies, 1 voice, and was last updated 9 years ago by thu062012.
Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #36357 Reply
    Muziwenkosi
    Guest

    Hi

    1. What sort of HR related questions would I expect?
    2. What about the related technical questions,e.g.propagation related,footprints of the bts(site),antena tiltings,instruments used, frquency parameters,the rf parameters,liaising with or who are the related role players when planning the rf.e.g clients/providers etc.?
    3. What about the management questions.?

    Thank you.

    #36358 Reply
    Jitendra
    Guest

    What propagation model used for modeling in ur area.

    #36359 Reply
    Muziwenkosi
    Guest

    All the questions are for the,”RF PLANNING ENGINEER POSITION IN THE GSM environment.

    #36360 Reply
    srinu
    Guest

    1. What sort of HR related questions would I expect?2. What about the related technical questions,e.g.propagation related,footprints of the bts(site),antena tiltings,instruments used, frquency parameters,the rf parameters,liaising with or who are the related role players when planning the rf.e.g clients/providers etc.?
    3. What about the management questions.?

    #36361 Reply
    gaurav
    Guest

    plz tell me whats type of RF planning question can be asked in the technical round of Planner in RF..

    #36362 Reply
    pix
    Guest

    i think the most important, if you don’t have much technical background, is to show that you “master” the process of network design.
    where does planning come into the picture, what are the inputs, the outputs, etc.

    If technically you don’t have very good knowledge, there is no point pretending you do. But, at least, show that your mind is clear about the job itself.

    Then, read some books about radio planning, that will be enough to make you more confident.

    Good luck !
    Pix

    #36363 Reply
    yogesh ssharma
    Guest

    All the questions are for the,”RF PLANNING ENGINEER POSITION IN THE GSM environment.

    #36364 Reply
    Mit
    Guest

    Hello Everyone

    I wanna ask one thing as we know RxL shows in dbm but we fine tune the parameter which is mostly is in db, so what is actual concept behind it…?

    #36365 Reply
    thu062012
    Guest

    Hi

    This topic help me a lot in developing my project. I will contribute more when I finished it.

Viewing 9 posts - 1 through 9 (of 9 total)
Reply To: Reply #36361 in RF Engineer Interview Questions
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">