Generic selectors
Exact matches only
Search in title
Search in content

HOW TO: Reduce CP Load for MSC

  • This topic has 2 replies, 1 voice, and was last updated 11 years ago by BONY.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #64652 Reply
    BONY
    Guest

    Hi all,

    Do you know how to reduce CP load for the MSC in case it reaches a high value? I have some solution:

    – turn off Authentication function
    – turn off IMEI Checking
    – turn off TMSI Reallocation
    – increase Implicit Detach Timer
    – turn off some Statistic function
    – block some traffic/signalling route
    – clear subscriber data, that powered-off for more than 24h, in VLR

    If you have other idea/opinion, please comment. Thanks a lot.
    BONY

    #64653 Reply
    pix
    Guest

    hi,

    i don’t have other ideas, but just one thing :
    – increase Implicit Detach Timer
    –> it should be “decrease”, so that MS are detached earlier and they don’t overload the VLR database, isn’t it ?
    When you change Detach Timer & Purge Timer, don’t forget to tune the T3212 accordingly (bss parameter)

    regards
    pix

    #64654 Reply
    BONY
    Guest

    Hi Pix,

    If you decrease that timer, MSC more frequently scan the database so its CP load will be higher. That’s why it should be increase that timer.

    Any idea else?

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Reply #64654 in HOW TO: Reduce CP Load for MSC
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">