Generic selectors
Exact matches only
Search in title
Search in content

Huawei Dynamic PDCh configure

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #64090 Reply
    RF
    Guest

    How can i configure dynamic PDCH which parameter i can change to have dynamic PDCH .

    #64091 Reply
    Alexia
    Guest

    By MML Commands for modifying channel type. See the help from BSC MML Commands Reference.

    #64092 Reply
    RF
    Guest

    Thnks , and it should have the same name in LMT.

    #64093 Reply
    NJ
    Guest

    If you use M2000, go to data auto configuration, cell/modify TRX channel type:
    Choose the Module-BIE-site-cell-TRX and Channel No and Channel type (dynamic PDCH)

    NJ

    #64094 Reply
    RF
    Guest

    dear
    I found that but i want to know how many dynamic is configured per cell as i have one is PDTCH and i donot now how dynamic they defined.
    can you please show how to find it
    Thnks

    #64095 Reply
    NJ
    Guest

    For our case we set one PDCH and one Dynamic PDCH /cell but it depends on your E1 capacity and % utilisation( voice/data).

    #64096 Reply
    Hasan
    Guest

    For BSC6000:
    The parameter “Maximum Ratio Threshold of PDCHs in a Cell(%)” defines dyanmic PDCH in a cell. Ratio of PDCHs = Number of available PDCHs/(Number of available TCHFs + Number of available static PDCHs). this parameter under GPRS Attributes/Ps channel management parameters.

    NB. For EDGE cell you’ve to look about Abis capacity. Then you will get full performance.

    BR//
    Hasan

    #64097 Reply
    GM
    Guest

    Hi All,but be carefull while chnaging this threshhold as it can result in DSP resource overlaod alarm in BSC

    #64098 Reply
    El Ghaouth
    Guest

    Heloo

    if I configure 1 PDCH Dynemic in one cell and if see trafic the SDCCH congestion is so high,
    and if i configure one DPCH static the SDCCH congetion is reduced.

    How is the diferance.

    #64099 Reply
    krish
    Guest

    Hi hasan,

    if ihave abis timeslot 64 k on abis then will it use for dynamic pdch for edge?

    and how can i check it how many abis timeslot 64 k defined on my even?

    #64100 Reply
    rs
    Guest

    help how can i get static pdchs.
    from m2000

    #64101 Reply
    Vikas Kumar
    Guest

    I want got Static and dynamic PDCH Confi per cell wise from U2000,

    Kindly do needful to provide step to fetch above required data

Viewing 12 posts - 1 through 12 (of 12 total)
Reply To: Reply #64097 in Huawei Dynamic PDCh configure
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">