- This topic is empty.
21st August 2010 at 09:01 #64090RFGuest
How can i configure dynamic PDCH which parameter i can change to have dynamic PDCH .21st August 2010 at 21:49 #64091AlexiaGuest
By MML Commands for modifying channel type. See the help from BSC MML Commands Reference.22nd August 2010 at 01:04 #64092RFGuest
Thnks , and it should have the same name in LMT.23rd August 2010 at 07:41 #64093NJGuest
If you use M2000, go to data auto configuration, cell/modify TRX channel type:
Choose the Module-BIE-site-cell-TRX and Channel No and Channel type (dynamic PDCH)
NJ24th August 2010 at 07:02 #64094RFGuest
I found that but i want to know how many dynamic is configured per cell as i have one is PDTCH and i donot now how dynamic they defined.
can you please show how to find it
Thnks27th August 2010 at 12:58 #64095NJGuest
For our case we set one PDCH and one Dynamic PDCH /cell but it depends on your E1 capacity and % utilisation( voice/data).29th August 2010 at 09:20 #64096HasanGuest
The parameter “Maximum Ratio Threshold of PDCHs in a Cell(%)” defines dyanmic PDCH in a cell. Ratio of PDCHs = Number of available PDCHs/(Number of available TCHFs + Number of available static PDCHs). this parameter under GPRS Attributes/Ps channel management parameters.
NB. For EDGE cell you’ve to look about Abis capacity. Then you will get full performance.
Hasan31st August 2010 at 05:16 #64097GMGuest
Hi All,but be carefull while chnaging this threshhold as it can result in DSP resource overlaod alarm in BSC15th December 2010 at 13:25 #64098El GhaouthGuest
if I configure 1 PDCH Dynemic in one cell and if see trafic the SDCCH congestion is so high,
and if i configure one DPCH static the SDCCH congetion is reduced.
How is the diferance.5th January 2011 at 16:20 #64099krishGuest
if ihave abis timeslot 64 k on abis then will it use for dynamic pdch for edge?
and how can i check it how many abis timeslot 64 k defined on my even?13th December 2014 at 15:49 #64100rsGuest
help how can i get static pdchs.
from m200028th February 2016 at 07:21 #64101Vikas KumarGuest
I want got Static and dynamic PDCH Confi per cell wise from U2000,
Kindly do needful to provide step to fetch above required data