- This topic has 44 replies, 1 voice, and was last updated 12 years, 9 months ago by zvino.
18th November 2005 at 14:36 #35686Garry !!Guest
If you think its temperory increase in sdcch congestion, Then you can increase the sd cofig from combined to non combined or with additional sd timeslots. And check whether the sd traffic is geniune.
Or else, check whether what is the maximum cause of this rise in sd traffic. Probably its a new location area boundary.
Best way to overcome this spurious sd congestion is using dynamic sd reconfigration.
Garry !!18th November 2005 at 14:52 #35687Garry !!Guest
If you use 1 LAC/BSC, with enough signalling then probably you can balance with paging & loc update. But the signalling design is totally dependent on the TRX config for that BSC and the type of signalling you use in your network.
Who is your BSS vendor ?
Garry !!20th November 2005 at 22:57 #35688ChahGuest
i have some site x with lower band (900) & upper band (1800) are in the same location, but they are integrated in differents MSCs. Is this configuration affects some ressources: LU, Sig congestion,…21st November 2005 at 07:10 #35689joodGuest
For 1LAC/BSC you have some benefits in term of moderated signaling on BSCs, A interface & MSC. SO it is recommended in first network planning.
BUT so after, according to your LA optimization & BSC capacity you can use LAC/different BSC, & furthermore you can use LAC/diff MSC but seldom.& it increase the paging signaling on your BSCs, MSCs & A links, so you must balance between LU events, & the the paging load followed your MSC/BSC/LA configuration.7th April 2006 at 15:45 #35690waelGuest
I want to know the main reasones for sdcch drop if we except the interference case .Could you send me you SDCCH dimensioning tool9th July 2006 at 15:02 #35691Bhatti YousufGuest
can you please also send me your SDCCH calculator and if poosible please attach how you calculating the CSSR and other stats.
Regards9th July 2006 at 18:42 #35692gauravGuest
I want to know the book of export mannagement this book should keep deep knowledge of export sinse starting to last and must be useful to me.3rd February 2008 at 05:32 #35693ShrawanGuest
i want to know detail cause and solution of SD Drop and TCH drop.4th February 2008 at 12:13 #35694PixGuest
It’s a very simple recipe for success : Good frequency planning, good cell coverage, and a non-faulty hardware 🙂14th March 2008 at 09:30 #35695swamiGuest
Can anyone share the performance indicator formulas….
swami29th March 2008 at 07:42 #35696vijay kumarGuest
i want to know detail cause and solution of SD Drop and TCH drop.24th April 2008 at 13:25 #35697ogGuest
whats the difference between TCH congestion and TCH blocking24th April 2008 at 16:13 #35698pixGuest
cf post “GOS vs. TCH assignment failure? ASAYC!!!”29th April 2008 at 08:55 #35699VanderleyGuest
Colocated sites in different MSCs?????9th May 2008 at 08:52 #35700zvinoGuest
there is no such thing as a counter for location update, and the default is usually 2hours for mororolla