Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

EnableMASelection

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #63744 Reply
    Mickey
    Guest

    Hi,

    Can you explain about EnableMASelection… This is currently set as false in our ALU B10 network.What is this parameter abt & will it effect our KPI?

    #63745 Reply
    Mickey
    Guest

    Pix,

    Do you have some idea on this ?

    #63746 Reply
    EnableMASelection to Pix???
    Guest

    Hi,

    Can you explain about EnableMASelection… This is currently set as false in our ALU B10 network.What is this parameter abt & will it effect our KPI?

    #63747 Reply
    pix
    Guest

    hi,

    sorry, i don’t know this parameter.
    can you share the description of this parameter here ?
    1/ what is the definition ?
    2/ is it changeable ?
    you can see this in the generic customer documenbtation in the OMCR.

    regards
    pix

    #63748 Reply
    Mickey
    Guest

    EN_MA_SELECTION=

    This flag enables/disables channel selection according to Mobile
    Allocation criterion.
    Coding rules 0: disabled, 1: enabled

    Currently this is disabled

    #63749 Reply
    pix
    Guest

    I think this is a “hidden” parameter. If you activate frequency hopping then this parameter should be automatically set to True. You are seeing this parameter in the ACIE files, am I right ?

    pix

    #63750 Reply
    Mania
    Guest

    Hi,
    This parameter actually prioritizes allocation to TRX having longer MAL assigned to it. it is used where different MALs are used in the same Zone. to allocate calls to that band which has greater robustness to fading / interference.

    #63751 Reply
    pix
    Guest

    oh yeah, now i remember. By enabling this parameter, the TCH are allocated preferably on the timeslots were the MA list is the biggest.

    Thanks mania 🙂

    #63752 Reply
    Mickey
    Guest

    Hi There,

    I am Using 1*3 in a cluster with 6 TCH Per MAL with 2 TCH gap & 1*1 with 18 TCH in MAL in another cluster(Complete band is 900)

    Now if i see my ACIE File this EN_MA_SELECTION= FALSE, Now tell me for which condition it would be favourable for me if i will enable this..

    #63753 Reply
    pix
    Guest

    enable it all the time, because i don’t see any reason why not to activate it.
    the benefit is perhaps very subtle, i doubt if there is any impact on KPI, but it makes sense to enable it.

    regards
    pix

    #63754 Reply
    Mania
    Guest

    Should be enabled, even though I can’t fully understand your situation. This works for call assignment between TRXs of same band within the cell.
    If your are using two different frequency plans in different clusters then this would not help,though having two TRXs with MAL1 and Two TRXs with a longer MAL-2 then enabling this parameter would prefer assignment to MAL2 TRXs.

Viewing 11 posts - 1 through 11 (of 11 total)
Reply To: Reply #63752 in EnableMASelection
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">