Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

why do we consider RXQual in DL Level HO

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #61000 Reply

    Can any one plz clarify that why do we consider RXQual if we are talking about Level HO which has nothing to do with Quality (if i’m not wrong)
    Thank you in advance

    #61001 Reply

    RadFreq : which equipent is it ?
    the handover algo are very dependant from the vendor…


    #61002 Reply

    Hi RadFreq
    I think you r talking of Huawei systems,If that is the case Level Ho doesn’t consider RX Qual.Level HO specifies whether the layered hierarchical handover is enabled. Cells are set to different layers and different priorities to implement the layered hierarchical handover. Then, based on the layers and priorities, calls are handed over to the cells with high priority (priority is related to Layer of the Cell and Cell Priority).


    #61003 Reply

    In Alcatel systems,

    the HO Lev takes place only when Lev is bad and Qual is good. There is indeed a check on the Quality.
    But that’s just because in case of Bad Qual, it is the HO Qual which is triggered.

    You should ensure that one and only one HO cause can be trigger in each situation.


Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: why do we consider RXQual in DL Level HO
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">