Generic selectors
Exact matches only
Search in title
Search in content

Problem with calls without CLI

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #57481 Reply
    Peter
    Guest

    Dear all,
    have You sometimes problem with transit calls from Cirpack. Out transit exchange EWSD (SW ver. 14) send IDR – Identification Requst and Cirpack do not send IRS – Identification Response) and calls are released.
    Have You any any idea?
    Thanks a lot.

    #57482 Reply
    Pan
    Guest

    Dear, Peter!
    Try to check on your EWSD parameters of the ROUTE which is selected when routeing calls from Cirpack. If you have LNDES parameter (in route) = ANIRQD + DATIMM + RELANIF, then your exchange will send release to Cirpack, if A-number is not available.

    #57483 Reply
    Peter
    Guest

    Dear Pan,
    thanks a lot of for Your advice. I learned IN “Command manual for ver. 14”, command MOD ROUTE, parameter LNDES:

    RELANIF RELEASE ON ANI FAILURE
    Specifies that a call shall be released when a
    request A-number identification (ANI) has failed.

    I didn`t wont release call without CLI but I want switch call without CLI to final destination.
    I apologize if I bad explained problem.

    Peter

    #57484 Reply
    Pan
    Guest

    Hello, Peter!
    Enter in command line of your EWSD switch DISPROUTE: ROUTE=//your route// and see output. If LNDES parameter = …..ANIRQD,DATIMM,RELANIF…. then modify this route by means of MODROUTE command (LNDES without ANIRQD,DATIMM,RELANIF).

    #57485 Reply
    Peter
    Guest

    Hi Pan, all routes in our EWSD are without parameters ANIRQD + DATIMM + RELANIF
    I think that would be better if You send me your email address . My email is peter.cermi(at)gmail.com and I could send You picture with descrition of problem.

Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: Reply #57484 in Problem with calls without CLI
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">