- This topic has 34 replies, 1 voice, and was last updated 2 months, 3 weeks ago by SHARON OKOTA.
12th April 2017 at 12:42 #57266pixGuest
To reduce or increase the coverage of a cell, you may (primarily) tune the CPICH power :
Amos: get utranCell primaryCpichPower
By default, use 330 (ie. 33dBm)
Dependencies: primaryCpichPower less than maximumTransmissionPower
Decreasing the cpich will reduce the cell coverage, but also decrease the Ec/No of the users inside the cell. They will “hear” more interferences.
A good way to check the coverage distance of a cell is to extract the counter “pmPropagationDelay”, at RBS level (class prach)
Amos : pmx prach pmPropagationDelay -m 3 -a
Within one sector, only analyse cells with highest amount of samples (ie. where the UE are camping).
pix14th June 2017 at 04:22 #57267Parsa48Guest
I have a lot of cs drop calls in Ericsson baseband 5216 for u900 technology please help me17th June 2017 at 20:18 #57268pixGuest
Many call drops in U900 is usually caused by users getting too low coverage of u900, without possibility of handover to another cell.
check the neighbour relation with GSM cells, check the event 2d thresholds, the 3a threshold.
Also check 3G neighbours…
but really, the first step would be to investigate the kpis and the topology, and understand what is causing the drops.
pix18th June 2017 at 11:28 #57269Pawan SharmaGuest
as per the Huawei please check the given switch for CDR improvement.
OptimizationSwitch4(BSC6900,BSC6910): RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_SWITCH2nd August 2017 at 02:39 #57270Parsa48Guest
I am working in Ericsson 3g and 4g networks. There’s a problem in 3G network(u900 with baseband 5216) .the uplink quality is very bad and in road area the subscribe could not use 3g data and in most times they have edge. Please guide me to know the reason and how to solve the problem5th August 2017 at 13:08 #57271LEMAUREGuest
make sure the neighboring GSM cells are well refarmed. Did you perform SSV on those sites?9th August 2017 at 11:20 #57272hungryforknowledge247Guest
Poor uplink quality on U900 could be due to many reasons.
Have you checked dominance in the area.
Is it just one site or cluster of sites.
Check for Scrambling code clashes.
Get it drive tested and analyse log files.
Check if there is external interference.
What is the value of Prx Noise you are getting.
Check 3G-2G and 3G-3G neighbours.13th August 2017 at 02:08 #57273Parsa48Guest
Hi to all dear
What is the fast dormancy feature?
How can iI check and adjust in Ericsson ran?13th August 2017 at 02:21 #57274Parsa48Guest
Kindly anyone help me for increasing wcdma voice traffic than gsm voice traffic in Ericsson network15th August 2017 at 15:09 #57275hungryforknowledge247Guest
Fast dormany is something which try and save mobiles battery consumption when link between mobile and network is idle15th August 2017 at 15:19 #57276hungryforknowledge247Guest
To increase traffic on 3G you can make reselection from 2G to 3G easier by changing reselection criteria. Make it reselect to 3G quicker and on lower thresholds.
And once this is done you can make calls to be more stickier to 3G. This can be done by chaning 3G to 2G handover criteria. Hope this helps.5th September 2017 at 12:17 #57277hicham27Guest
could you please help me to kown the reasons of drop (speach , HS,R99 …..)11th September 2017 at 08:28 #57278Parsa48Guest
Hi dear all
Kindly please help me about iub frame loss in Ericsson Baseband 5216 and solutions for it.13th September 2017 at 02:26 #57279Parsa48Guest
Iub frame loss issues
In one of site with Ericsson baseband 5216 node there is huge of iub frame loss. Please help me to solve it.8th October 2017 at 03:30 #57280Parsa48Guest
Hi all dear friends
I am facing with decreasing of wcdma cell availability in some Ericsson nodeb site. I, m be so happy if anyone help me to solve this issue.