- This topic has 54 replies, 1 voice, and was last updated 3 years, 9 months ago by
Mohamed M.
-
AuthorPosts
-
15th September 2010 at 04:17 #54247
sunil kumar singh
Guesti m in o & m, want to know various commands for bsc.
15th September 2010 at 15:37 #54248eli
Guesthow can i fix this alarms?
1. channel failure rate above defined threshold(CFR).
2. Mean holding above defined threshold(MHT).
3. CH CONGESTION IN CELL ABOVE DEFINED THRESHOLDHow can i get the NED?
13th December 2010 at 15:22 #54249Ashish kumar
GuestQ 1-what is the MEAN HOLDING TIME BELOW DEFINED THRESHOLD.
Q 2-channel failure rate above defined threshold.
Q 3-CH CONGESTION IN CELL ABOVE DEFINED THRESHOLD.
Q 4- INCONSISTENT DATA IN RADIO RESOURCE MANAGEMENT STATE FILES.plz help i’m working with NSN project frm last 1.5 yrs.i’m working as an O&M engineer.i want NED & All BSC/BSS MML commands
22nd March 2012 at 06:15 #54250santosh
GuestPLS GIVE THE BRIEF DETAILS ON
1. channel failure rate above defined threshold(CFR).
2. Mean holding above defined threshold(MHT).
3. CH CONGESTION IN CELL ABOVE DEFINED THRESHOLD
4. INCONSISTENT DATA IN RADIO RESOURCE MANAGEMENT STATE FILESand how to resolve the same .
10th April 2012 at 12:10 #54251SWATI SINGLA
GuestHi
I have been working on SDCCH blocking and hence on 7725 alarm. If the alarm comes during the dynamic SDCCH channel allocation, then what will come in the supplementary information of this alarm (0 or 1)?
15th August 2012 at 06:26 #54252Marious Nathaniel
GuestSir,
i have mean time holding below threshold alarm and traffic activation failure alarm on sector 2,3.trx4 and 6.help me with what to do2nd September 2012 at 11:57 #54253Taofeek Mustapha
GuestHow can we resolve Channel Failure rate and Mean Holding time alarm on FlexiEDGE BTS?
Also for RSSI alarm
19th August 2013 at 07:43 #54254amit
Guesthi
7725 alarm is coming due to info 0
and tch channel are going in Bl-sy state.plz help how to rectify for fail due to tch Fail(supplementary info 0)
1st March 2014 at 09:16 #54255Ali Sim
GuestDears i receive this alarm can any one explain the problem?
BSC710N_DHK BCF-0081 BTS-0811 ENVIR 2014-03-01 02:57:49.43
* ALARM G4960A
(18493) 7712 WORKING SDCCH CHANNEL RATIO BELOW THRESHOLD11th March 2014 at 09:49 #54256Pritam
GuestHi Tech team,
for CHANNEL FAILURE RATE ABOVE DEFINED THRESHOLD Supplementary information fields 1 shows 02 which is failure on sdcch channel 90%.I found the resolution by not defining the ch with sdcch.example sectA has 4 trxs.TRX 1 we have sdcch and trx 2 ch0 has also sdcch.after defining trx2 ch0 as tchd alarm disappear.My question,is this alarm trigger on sdcch for wrong TRX and channel definition and what is the logical reason7th May 2014 at 07:32 #54257Ambrish Kumar Mishra
Guest7725 alarms where additional info is 02 due to this data services are affected
ALARM DESCRIPTION:
TRAFFIC CHANNEL ACTIVATION FAILURE17th April 2015 at 14:58 #54258jen
GuestI ALSO HAVE THIS ALARM: 7725 TRAFFIC CHANNEL ACTIVATION FAILURE. I TRIED TO RESET THE TRX AND EVEN BLOCKED THE RTSL BUT ALARM APPEARED IN A DIFFERENT RTSL.
14th May 2015 at 13:28 #54259chaman kumar
GuestWhat is CHFR alarm rectification process.
9th June 2015 at 16:10 #54260Ashok Singh
GuestWHAT IS IMPACT OF “ALARM THRESHOLD FOR NUMBER OF CHANNEL SEIZURES” IN NOKIA OPTIMIZATION.
24th August 2015 at 10:30 #54261srinivasarao
Guestwhy mean holding time above/below defined threshold alarm comes and how to clear this
-
AuthorPosts
- The forum ‘Telecom Design’ is closed to new topics and replies.