- This topic has 98 replies, 1 voice, and was last updated 10 years, 7 months ago by
anand.
-
AuthorPosts
-
Bijoy
GuestDefinitely not
KRISH
Guesthi,
U MEAN WILL NOT IMPROVE SD BLOCKING.
Gerald Thomas
GuestPlease can someone help me:
1. i don’t where i can find the RACH time
2. where i can the lapd from 16 to 32k
my equipment is ZTE
Gerald Thomas
GuestAlso, the site has three sectors but only sector_2 is having low Total Number of SDCCH Attempts and extremely low Number of Successful SDCCH Assignment and these affect the Accessibility to SDCCH.
Please can someone help!
Bijoy
GuestHi Krish.
SDCCH Blocking due to LOC update cannot be minimised by LAPD multiplexing changegerald thomas
Guesthi Bijoy,
In ZTE, we have Minimal Signal Strenght of MS Uplink RACH Access (RachMin, -dm)and RACH Load Indication Threshold, there values are 125 and 60 respectively.
what is your suggestion?
Bijoy
GuestHi Gerald
Minimal Signal Strenght of MS Uplink RACH Access should be around -109 dBmRACH Load Indication Threshold should be 80%
krish
Guesthi bijoy
But here i am getting 2 % in sd blocking imrovement after lapd from 32 to 64 which is due to lac update.
If ur point of view its not possible can u explain why its not possible in lac update?
Bijoy
GuestHi Krish
2% improvement is not a conclusive improvement.
since SDCCH Holding Time during LOC update is high,increasing LAPd from 16K to 32K will not help much.
If u really want to bring down the SDCCH Blocking due to LOC update,change its LAC,u will observe very good resultsgerald thomas
Guesthi Bijoy,
i will make the changes and observed
gerald thomas
GuestHi Bijoy,
we have made the changes but the situation is still the same.
so do you have anymore suggestion?
Bijoy
GuestIf your problem was due to LOC update,changing the LAC of that cell as that of its neighboring cells should have helped.Carrier addition & SDCCH addition is the last resort then.
U can also increase the T3212 timer to 4-6 hours(if not already done).but this might lead to poor PSRSeles83
GuestWhat are causes of high TCH Blocking on same cells. How do i cap the trend…my vendor is ericsson.
jairohila
Guesti m working in bsnl project plz help me for improve tch drop.there is tch drop on site around 7 to 14%.plz suggest me wht i do 2 improve it.
thanx
krish
Guesthi seles,
is there dual band?
-
AuthorPosts