Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Authentication setting.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #51633
    SPR
    Guest

    Would anyone please share the Authentication setting on your network?

    For our network, we set to do the authentication at “Mobile attached”, “Location update” and every 10 calls. Is it too much?

    We would like to manage the call set up time and SDCCH usage.

    #51634
    Pix
    Guest

    In the system i know, the authentication is performed at IMSI attach, Loc Upd and every call setup (OC or TC). There is no problem of overload or too long call setup time : the duration of the authentication is few hundreds of ms.

    #51635
    Abdel
    Guest

    You must ensure that there is no overload on the AUC database. Beside there is a parameter which controls the number of authentication that can occur simultaneously. This is to prevent the equipment from break down. If it reaches this threshold all the excess authentication will be discarded.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.