- This topic has 409 replies, 1 voice, and was last updated 16 years, 12 months ago by
Dude.
-
AuthorPosts
-
2nd August 2006 at 13:36 #34128
ubaid fawad
Guestcan anybody tell me about frequency hoping?
3rd August 2006 at 05:11 #34129DJ
GuestFor optimization which value of CP Load we should consider.
24 Hrs-Average ?
Peak Hour CP-Load ?
Rgds
8th August 2006 at 05:12 #34130ubaid fawad
GuestHi.
Can anybody tell me the working of DUPLEXERS used in BTS cabinet.15th August 2006 at 10:23 #34131Noora
GuestDear All,
I have question about Signalling link and how can I calculate needed number of Singalling link between network elemnts?
is there any formala to calculate neede Signalling link ?
Best Regards,
Noora
17th August 2006 at 10:12 #34132a
Guestdear krishnan
ur knowlegh was usefull for me too!
do u have any info about other hardware ?which factors should be considerd to choose a server?
18th August 2006 at 09:14 #34133JIC
GuestHi all
I am an in employee of a telecoms company and a Core Plannning & Optimisation Engineer and part of my Job includes:
Dimensioning MSCs,BSCs,HLR,SGSN,GGSN,MGw,MSS
Now our company is about to launch GPRS and very soon will go EDGE. So our company is currently preparing the budget for the coming year and its during this time that each section wiil have to submit all the requirements
So i am interested in knowing what kind of tools i will need for me to dimension the Core of our network19th August 2006 at 17:18 #34134MEHRAN
GuestHi all
I want to import file from “solid work” soft ware to “adams”
please help30th August 2006 at 00:47 #34135Mikey Browne
GuestHi.
I am troubleshooting some issues on an Ericsson RBS 2×06. I am gettnig a lost of sites with Timeslots blocked, multiple TS on the dTRU are blocked. I checked the transmission and the DIP’s and they look OK.
I am seeing TS Sync Faults and Loop Test Failed on the BSC.. and TRA PCU alarms on the RBS.
Any ideas as to the possible cause.
Thanks You
30th August 2006 at 12:55 #34136yalew amare
Guestdears
i was to design telecommunication infrastracture assignment with specified traffic load and link distance. but i had no design manuals for that.can u refer me one and give me some ideas?
thank u in advance
17th September 2006 at 09:08 #34137signalling
GuestPlease Help
More than half of the sites on BSC have failed .The DIPs are working fine and if you bring
up a site ,it will come up but another site will go down.The TFs will be in NOOP.This point to a sync problem .I need the commands to do the following
1)Check the CLMs range, and re-aligned.
2)Send signal to MSC to align the CLM
3)Check the CLM and Sync is stabilised17th September 2006 at 09:43 #34138omkar rai
Guesthi all
if anyone can please help me to undestand how call is routed through BSC-Transcoder-MSC.iam working on Motrola equipment.9th December 2006 at 01:58 #34139Tim
GuestHas Anyone seen the new Gatoradee ad? It’s Hilarious!
15th December 2006 at 23:02 #34140john
Guestwhen would u use horizontal or vertical ntennas
17th January 2007 at 13:48 #34141Srikanth
GuestHi friends,
Can any one know the Switch structure of GSMFor Example:If we are using a SWITCH Lucent 5ESS 2000 for GSM.Do you have any idea how topolgy/structure of this switch in GSM.
18th January 2007 at 06:40 #34142qmar
Guestany of you know how about sharing of antena between mobile operators for 3G network?pls help me..
-
AuthorPosts
- The forum ‘Telecom Design’ is closed to new topics and replies.