Generic selectors
Exact matches only
Search in title
Search in content

Switch Planning for GSM

Viewing 15 posts - 16 through 30 (of 410 total)
  • Author
    Posts
  • #33753 Reply
    Harshvadan Jani
    Guest

    Hi sudhir
    what is LTG?
    as such i work with Ericsson Swtich so i dont have any idea with the term LTG.
    thanks
    Harshvadan Jani

    #33754 Reply
    Sudhir
    Guest

    Hi Jani,

    LTG its a siemens terminology, for Line Trunk Group.

    DIU OR DSL: Digital interface Unit : is the interface where the actual E1s are terminated

    Four DIU are connected to One LTG card.Siemens switch has a maximum of 256 LTG. that means u can have 256*4=1024 number of E1s terminated in a single switch.

    I hope i have cleared u r doubt.

    #33755 Reply
    Harshvadan Jani
    Guest

    Thanks Sudhir for explaining the term LTG.

    with best rgds,
    Harshvadan Jani

    #33756 Reply
    jerry
    Guest

    hie Harshvadan Jani
    Our switch is an Erricson AXE10 .
    On VAS(Value Added Services) we use a comverse ISMSC. I am looking forward to develop sms based VAS services for my company. I also want software for the SMPP interface on the ISMSC-please help!.If you can give me information on how I can dimension all the elements of the switch(ecpool,ETCs towards the PSTN, ETCs towards BSC,C7 links,CSK-D,AST-DR,CCDs,etc.I also want information on capacity planning,traffic measurements,etc.

    #33757 Reply
    Nitin
    Guest

    Hi,

    Is there any body who can explain me about E1 & PCM.

    Regards

    #33758 Reply
    Sudhir
    Guest

    Hi Nitin

    PCM is pulse code modulation.It converts anlog signal into digital signal. The sampling frequency is 8000hz, that is to say u have 8000 samples per second(this process is called as sampling). each sample is represented by 8bits(Quantising and coding).PCM30 or E1, has 32time slots and each time slot is of 64kbits/sec so the transmission rate for one PCM-30 is 2048kbits/sec.

    #33759 Reply
    Nitin
    Guest

    Thanx Sudhir,

    But can you explain that what is the meaning of like we have applied to BSNL for 8E1 for local & 4E1 for TAX. How many subscribers One E1 can handle?
    & in 1 PCM cable how many E1 can be accomodate?

    #33760 Reply
    Sudhir
    Guest

    Hi Jani,

    BSNL is the gateway to external world.All ur STD and ISD calls are routed through BSNL. when u have asked for 8E1s from BSNL that means ur exchange will be connected to the gateway at BSNL through 8 pysical links.These links are physical trunks connected between ur exchange and BSNL. 1PCM cable will carry only one E1. As i said earlier one E1 has 32timeslots, out of which 2 timeslots are used for signalling and rest 30 timeslots are used as traffic chanels. so one E1 can carry 30 speech channel at a time.

    #33761 Reply
    Mehmet Beyaz
    Guest

    Hi Guys,

    For any questions about NSS and BSS planning I can help.

    Regards
    Mehmet Beyaz
    Do not hesitated to contact me if you have further questions
    mehmet.beyaz@ttgint.com

    #33762 Reply
    Vasanth
    Guest

    hi,

    I am fresher under motorola training in gsm fundas , sys 02, sys 04,CDMA and Gnl 070
    and am currently assigned to Switching by Motorola on BSNL project in India.

    Can anyone help me out with some material on Siemens Switch in MSC

    Vasanth Mohan Manchi
    mvmohan1038@rediffmail.com

    #33763 Reply
    makhijap
    Guest

    hi
    I am working as digital switcing installation engineer,can u give reply that .what is GSM system ,and type of method for designing passive/active reflector.2 what is access net ,give its types and where we can use and how it is working for subscriber.

    #33764 Reply
    Sharma
    Guest

    Hi Sudhir

    As u told that u can help in the field of RF.So will u please let me know about Frequency Hopping.

    Regards

    #33765 Reply
    Nitin
    Guest

    What is the meaning of E1 for TAX & E1 for Local.

    #33766 Reply
    Van 14 _9_2002
    Guest

    Hello Sudhir !!!
    I am working in Telecomunication copany in VietNam .
    Could you help me some thing?
    1 -diversity antenna (in mobile comunication )
    2- about antenna (type ,confige,characterictic …)
    3 -what is cross antenna ?
    4- How to install antenna (for Base Tranciever Station )
    send me detail ok!
    thanks in advance!!!!!!!!!

    #33767 Reply
    Muzammil
    Guest

    Hi Nitin,
    E1 means the European standard of Primary Carrier Multiplex (PCM), T1 (American) and J1 (Japanese). E1 has 32 timeslots (TS) out of which 2 TS carry Signalling and Sync. Each Channel carries 64kbps of Pulse Code Modulated (PCM) voice.
    TAX (Trunk Automatic eXchange) is a higher hierarchy of the switch, which usually carries STD calls from one region to other.
    And Now E1 for TAX is the E1 PCM which is connected directly to TAX, and E1 local is …

    Hope this helps….

Viewing 15 posts - 16 through 30 (of 410 total)
Reply To: Reply #33760 in Switch Planning for GSM
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">