Generic selectors
Exact matches only
Search in title
Search in content

paging per second

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #49262 Reply
    AD
    Guest

    Hi, in our network, ther was sudden increase in paging per second and decrease in paging success rate for 3 LACs. we are using alcatel systems….could anyone help me about the location of problem.

    #49263 Reply
    Myne
    Guest

    If it has occured after a LAC change activity, one of the reasons could be existence (duplication) of extra CI with old LAC on NSS side.

    #49264 Reply
    Roy
    Guest

    Dear AD,
    Firts you have to check the paging capacity per BSC vs. the number of subscribers per each LAC. In case number of subscribers is greater than the paging capacity ( depending also on the paging mechanism, IMSI-IMSI, TMSI-IMSI, repeated pagings …etc) then you have to split the LACs.

    Good Luck

    #49265 Reply
    Rayan
    Guest

    Hi,

    kindly i need to know which the parameters that related with paging in MSC,BSC and RF to change it for increasing the paging ratio…

    #49266 Reply
    Rayan
    Guest

    Hi,

    kindly i need to know which the parameters that related with paging in MSC,BSC and RF to change it for increasing the paging ratio, already we use Huawei vender…

Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: Reply #49266 in paging per second
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">